Hyper-V issues?

[dianebrat]

My turn to have an issue that's out of the ordinary and I'd like some additional data points.

I have a project I wanted to move to my G20 that requires Win7 and since I upgraded to Win10 it was the perfect time to turn on Hyper-V and install a Win7 VM.
First item was that I had to go into the BIOS and turn on virtualization, no big deal, then I added the required roles in Windows, rebooted, and BSOD.
The only way out of the BSOD was system restore.

Fine, I figure it's not happy that I turned on virtualization after the OS was installed or that I did an upgrade, so I did a clean Win10 install.
No difference, still won't boot with Hyper-V on.

So is anyone out there successfully running Hyper-V on their G20AJ's?

[dianebrat]

I'm still interested in thoughts on this, but instead of going for a Win8 VM I just restored back to Win 8.1 to get the functionality back, I'll revisit Win10 on this box at a later point.

[toronto699]

Did u create the Hyper-V as Gen 1 or Gen2 ? Hyper-V in W10 Gen 2 is not ready in W10

[dianebrat]

toronto699 wrote:
Did u create the Hyper-V as Gen 1 or Gen2 ? Hyper-V in W10 Gen 2 is not ready in W10

Never even got to that point, as soon as the Hyper-V features were added to Win 10 I could no longer boot into windows, I'd hit a BSOD and had to System Restore to a previous point, it did this both on the upgraded Win 8.1 to Win 10 install, and then on the clean Win 10 install. This is why I'm curious as to if it's a mobo or bios issue, I may try adding Hyper-V onto the current 8.1 Pro install I have just as a test.

However running Oculus .6 runtimes was the goal, and Win 8.1 will run them fine and I get WMC back which isn't a bad thing.