First time posting on here. I've owned a GL12CX for a few months now and finally got around to attempting a RAM upgrade. I purchased Corsair Dominators, and even though they're rated up to 3200mhz, I only get 2133mhz out of them. Attempts to manually set the speed to equal that of the factory RAM, 2666mhz, has no effect. Attempting to load either XMP profile 1 or 2 in the BIOS results in a boot cycle loop. Is it possible to overclock my RAM on this system? I notice that the BIOS for the GL12CX lacks the AI Overclock options of Asus' other Z390 chipset motherboards... Appreciate any help given!
Kind of an old thread but still... same story here with GL12CX - not booting up with either of XMP. I got trident 2x32GB 4000. Under 313 BIOS the best it is running at 3200mhz. There is no any safe solution to make it work I guess due to DIMM.2 module installed in that MB. It is good to have dual M2 SSD up and running for my tasks (laser scanning point cloud data processing and 3D modelling), but was is a good trade-off to expanded system capacity (XMPs)- well, I am not sure. Anyway messing with third-party bios re-writing opening hidden menus is not the way here, at least for me. Better to have system running while it is time to upgrade it to something of +2GEN components.