cancel
Showing results for 
Search instead for 
Did you mean: 

G20AJ fitted R7950 boots but shuts down on load.

nig451964
Level 7
Hi Guys.

I have scoured the web and thus far tried three different jumper settings.

I have both 230watt and 180watt psui's plugged in although it seems to make no difference with the 180 watt plugged in or not,

the moment I put any load on the GPU it fails!,

any ideas,

So tried all the jumpers down, all up, 2 down & 3 up, still makes no difference ?

Please somebody help as I am losing my rag with this.

Yours hopefully.

Nigel.
1,729 Views
1 REPLY 1

Valdhor
Level 9
Take a look at this thread on how to set the jumpers. Also, have you connected the power cable(s) to the card from the motherboard?