- last edited on by
ROGBot
So I am attempting to upgrade my G20's anemic 745 to a PNY 960 GTX.
I have the correct parts
PNY 960GTX 4GB XLR8 Reference cooler
180W PSU
230w PSU
8 pin to 6 pin Power Cable
I've got the card to fit ( Just barely), but now I am stuck on the jumper layout.
I've searched this forum high and low for the correct jumper positons, but all I can find are conflicting reports.
Here is a photo of my current setup (not working)
Can anyone help me?
I have the correct parts
PNY 960GTX 4GB XLR8 Reference cooler
180W PSU
230w PSU
8 pin to 6 pin Power Cable
I've got the card to fit ( Just barely), but now I am stuck on the jumper layout.
I've searched this forum high and low for the correct jumper positons, but all I can find are conflicting reports.
Here is a photo of my current setup (not working)
Can anyone help me?
So I'm going to put this out there one last time, if I can't get this to work... I'm done with this.
My g20 was the i3 / GTX 745 originally if that helps.
Here are photos of my setup, can any of you see anything out wack (Because according to all the posts everything should be in order)
(Ignore that fact that the HDMI is plugged into the onboard... I was testing things)
I appreciate any and all ideas.... and yes I've searched this Form EXTENSIVELY to try and find help.
My g20 was the i3 / GTX 745 originally if that helps.
Here are photos of my setup, can any of you see anything out wack (Because according to all the posts everything should be in order)
(Ignore that fact that the HDMI is plugged into the onboard... I was testing things)
I appreciate any and all ideas.... and yes I've searched this Form EXTENSIVELY to try and find help.
