cancel
Showing results for 
Search instead for 
Did you mean: 

V/F Editor (Turbo Boost 3)

NorySS
Level 7
Hi Everyone,

I have both the z490 apex and the x299 encore.

I noticed that on z490, not only can you adjust the core via 'PER CORE USAGE' ie TURBO, but you can also edit the V/F points up to 5.3Ghz.
This is helpful because its allowed me to OC my 10900K 5.1 on all 10 cores, but also still hit 5.3Ghz on 4 cores and 5.2Ghz on 6 cores. All while maintain voltages at a very safe level.

Anywho, I noticed that the encore has the 'PER Core USAGE', but not the V/F editor. Is it possible to implement this.

also PER core/per core voltage seems to be static. I'd like to replicate the turbo behavior.

Right now, by CPU can maintain 4.6Ghz @ 1.14v on manual. Trying to fiddle with a negative offset instead, causes instability, since it requires a ton of negative offset, to get to 1.14vid.

Thanks!
961 Views
2 REPLIES 2

NorySS
Level 7
yes no maybe?

Hopper64
Level 15
I don’t know. I haven’t seen a V/F editor in the bios as you describe. I’m just not sure about this. Hope someone can shed some light on your question.
MZ790A Bios 2002, GSkill F5-8000J3848H16GX2-TZRK, 13900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ Optimus block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Samsung 990, Windows 11 Pro