USB3 disconnection problem (RVIE)

[tistou77]

Hello

When I connect a 2.5" disk to the USB3 port of the case (USB3 header), it connects / disconnects without stopping
I tested with a PCH voltage of 1.0 to 1.08v, but still problems (at 1.08v, it is less often)
To connect a 2.5" disk to USB3, it takes more than 1.08v for it to work properly?
Another voltage to check ?

Thanks

PS: I had the same problem with the R5E and R5E10, and a PCH voltage at 1.07v corrected the problem

[LiveOrDie]

Try installing the USB drivers.

[tistou77]

I use those from Microsoft, those of ASMedia are less efficient
And no problem with USB sticks

Thanks

[FireRx]

hey Tistou77,
That's a Microsoft fix if your on the latest and greatest. Virtual Bus emulator Driver is at fault. Microsoft knows about it and hopefully patch it soon. :cool:

[tistou77]

I have the latest Cumulative Update, a Microsoft problem then ?

[tistou77]

I wanted to test with the ASMedia drivers, but Windows tells me that the latest drivers are already installed or something like that (by the device manager)

[LiveOrDie]

tistou77 wrote:
I wanted to test with the ASMedia drivers, but Windows tells me that the latest drivers are already installed or something like that (by the device manager)

manually install them by browsing, i have been using the ASMedia drivers for months with no issues.

[tistou77]

With the latest Windows 10, it does not work
I have the message indicated above

After searching, it's like the USB3 drivers from Intel, must use those of Windows 10

[tistou77]

Wrong post