Hi, I 'inherited' in nice setup, which I cannot stabilise, runs fine for at least a few hours before freezing / restarting, etc.
This is the setup:
ROG Rampage VI Extreme (1503 Bios)
Core i9-7900X
Corsair Vengence LPX 16GB (4 x 4GB) DDR4 DRAM 2400MHz C16 Memory Kit (X2 - two separate kits) - total of 32GB
EVGA Supernova 1200W Fully Modular 80+ Platinum Power Supply
As you can see, it has two separate 16GB Ram kits, which are currently installed as one kit in the left side of the CPU and one kit in the right side of the CPU. The system will be stable for some period of time (sometimes 24+ hours), but then freezes / restart, etc. This is pretty consistent.
Reading the manual, I see there is A1, B1, C1, D1 and A2, B2, C2, D2. When installing 4 modules, you should install in A1, B1, C1, D1.
So, my question is, should I install kit one in A1, B1, C1, D1, and kit two in A2, B2, C2, D2? Would this help with stability?
