cancel
Showing results for 
Search instead for 
Did you mean: 

Rog rampage vi extreme omega

csbin
Level 7
970 Views
360 REPLIES 360

Deathscythes wrote:
I believe I explained the best I could in my previous post ^^ for a more detailed answer try asking in the modded bios thread :
https://rog.asus.com/forum/showthread.php?108495-Modded-bios-Rampage-VI

From what I understand It's a very specific issue that concerns people running Skylake X non refresh on the omega board


Thanks for the link. I am curious about how software (or the modded Bios) achieves lower temperatures--and wonder. I am really a noobie to such technical issues, and don't understand exactly what you mean by "non refresh." But I do have a ROG Ryujin cooler (and also a second ROG Ryo cooler in my older rig) and saw a video where the guy berates an aspect of one of these coolers' design relevant to a software issue--namely how the software reads the temperature data. Apparently it was getting the CPU temperature from the socket instead of from the CPU itself--and so it looked to be running cooler than it was really running. Anyhow, thanks for the link. I will likely pose a question there. And I am glad you solved your problem, at any rate.

Hello everyone, I am trying to create RAID 0 as a boot disk on the asus rog rampage vi extreme omega motherboard.
*I9 7980xe processor
There are two SSD drive SAMSUNG 970 EVO Plus MZ-V7S250BW 250GB, M.2 2280, PCI-E x4, NVMe
1. I tried to do it through DIMM. 2 EZ Tuning Wizard sees ssd, but does not allow to unite in RAID.
2. If you do it through the chipset, then one ssd does not see
3. Do you really need the key VROC_HW_KEY to make RAID 0? Please help, those support is silent ...

Zbigniew
Level 10
6oTiN0k - The answer is simple
I have two Samsung 970 pro m2 (NVME) drives + one Plextor (NVME) PCI-EXx4 drive. 44-line CPU. I spent a lot of time with the problem. There are separate forum threads (not just mine)
1. Asus APEX / Asus Extreme
You can create an Raid0 via PCH on the Dimm connector closer to the processor. Without the VROC key, RAID0 MATRIX CAN NOT BE CREATED via CPU lines with NO-Intel SSDs. It only works with Intel Optane drives.
2. Asus Omega.
You cannot create a botable raid matrix with Samsung m2 drives at all. There is a separate, extensive forum thread about this.
MOTHERBOARD HAS A KICKED CONSTRUCTION and no bios has helped.
Personally, I fought it for a long time, others too.
On a 28-line CPU, going from Apex, you could create the Raid0 matrix without any problems. Omega can't do it in any way with 44-lines CPU. I have used Samsung drives without Raid mode all the time - a small loss because you won't see the difference. I was successful in obtaining the Raid matrix in Asus Encore ... when I was able to sell the Asus Omega motherboard two weeks ago. Malcontents call it the alpha version of Asus Encore. You're out of luck with that.
3. My new Asus Encore motherboard can, just like Apex, create Raid arrays in a manner consistent with the conditions contained in the manual, if you want, check how yourself. It works (Raid-mode) without a problem, but I do not use it now, because the difference I did not see in use outside of testing. Personally, I gave up the fight with Intel x299 raid arrays, I can't afford senseless expenses (Vroc-key). Sorry for the English.
Blessed are those who have not seen ... And now they see.

tistou77
Level 14
For those who put this Omega in a case, unable to put the graphics card on the 1st slot of the case (but on the 2nd), doesn't that sound weird ?
If you have photos to share 😄
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus

Anyone tried to load the new Bios 3006 from 2/19/20? I've downloaded it 3 times renamed it and it gives me a "failed to read file" message everytime I try to install it.

blaine wrote:
Anyone tried to load the new Bios 3006 from 2/19/20? I've downloaded it 3 times renamed it and it gives me a "failed to read file" message everytime I try to install it.

works fine for me but i dont remane the bios file and installed it via usb stick in the bios itself?

blaine wrote:
Anyone tried to load the new Bios 3006 from 2/19/20? I've downloaded it 3 times renamed it and it gives me a "failed to read file" message everytime I try to install it.


I couldn't get 3006 to download from a USB stick, flashing it manually, but was able to download it online from the previous BIOS under "Tools." And I did this twice, no problem. But the new BIOS 3006 had my overpriced 1080xe i9 running at 4100 MHz at idle with the settings at default. I downloaded it twice to be sure there was a problem with this new 3006 BIOS, and not something else. The second time was after a new install of Windows 10--which evidently made no difference--it still was overclocking my CPU at default.

High fives all around Asus (sarcasm).

shark75
Level 7
*Where is the best place to install my m.2 / which slot will give me the best cooling - DIMM.2 or the M.2 slot under the cover?

shark75 wrote:
*Where is the best place to install my m.2 / which slot will give me the best cooling - DIMM.2 or the M.2 slot under the cover?


@shark75: Havend tested the expantion. but the 970 pro is about 38 degr celcius all the time placed under the first PCIe slot under the 'cool' RTX2080Ti OC Strix, i guess about 4-5 degrees hotter then expected be but no biggy....

Здравствуйте! Пытаюсь в очередной раз создать RAID 0 на плате asus rog rampage vi extreme omega.
пытался на ssd SAMSUNG 970 EVO Plus NVME M.2 через DIMM.2, ничего не вышло из за совместимости или что типо этого,был
куплен ключ всевластия и бложенства (Ключ активации RAID INTEL VROCSTANMOD) - он тоже не помог.
плюнов на это купил 2х M.2 накопитель Intel 760p Series.
что то получилось но не совсем,не получаеться установить WINDOWS 10 на созданый RAID 0,
его не видно.


https://ibb.co/Mf50PxW
https://ibb.co/gZyjfxv
https://ibb.co/zJGzx8Z
https://ibb.co/Zm9MyKS
https://ibb.co/Wzx9n32
https://ibb.co/vV0GY4n
https://ibb.co/SsQ30xh
https://ibb.co/Y75Q9Yc
https://ibb.co/27gWDZ2
https://ibb.co/Dgn7Xps
https://ibb.co/Z6KYC6K