08-06-2020 09:19 AM
09-30-2020 11:52 PM
Wondering if anyone could shed light onto a cold boot issue I am having with my rampage 6 Extreme Encore.
I originally had non qvl memory and was having crashes and other such issues as well as a cold boot af code detect memory every time resulting in powering off and on the system via power button. Then system posts in safe mode and restart, reloads, posts fine and everything working perfectly again.
Swapped out to 32gb 4x8gb Corsair lpx 3600mhz which the exact model is on the boards qvl list.
Loaded up with XMP and works perfectly, tested several hours of prime 95 and memtest no single issue. Several hours of gaming no single issue. Several hours of other stress tests, no issue. System works perfectly.
Yet IÃ¢â‚¬â„¢m still getting the same cold boot message of detect memory. Again hold power button, power back on into safe mode, restart posts fine and system works without fault until the next time I start from cold boot again.
Tried upping dram voltage, vccio and vccsa voltage up and down, manual timings and voltages, uncore offset, enable dram cold fast boot, fast boot and dram training. And no difference still the exact same issue.
I can confirm that stock memory speeds it doesnÃ¢â‚¬â„¢t do this. But at XMP settings which is 100% stable in os results in the error every time. Not a huge problem but annoying and means messing around restarting system everytime I want to use it.
Bios is also latest.
Anyone have any suggestions that may help fix the issue?
CPU is 10980XE
01-03-2021 09:06 PM
01-04-2021 02:29 AM