Hello
By mounting the R6EE, I had recovered an 8pin from the R6E and added another 8 pin
And I forgot to plug the 8pin (coming from the R6E) on the PSU :eek: :eek:
I plug it in, and after the double boot, I have the message "Check CPU" on the OLED... I had a bit of a strain...
😞I turn off the PC, unplug this 8 pin, plug in the 6pin instead and it's good
I checked that the 8pin of the R6E was "wired" the same as the R6EE (to be sure) and of course it's the same
What could this be due to ?
Thanks
😉PS: I did not try to reconnect it and I will try with 8 original pins (the one I have is "sleeved")
Sorry for my english 😄
Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus