R6E with CODE 00

[henriamolv]

hello everyone


I have the dreaded code 00 on an R6E.. this happened after psu upgrade to a new one - the psu old one is working too.


What i tried?

- Flash 3701 (new update) in both. the process ends correctly.
- memories in different banks (memory LEDs light up) single, dual or quadchannel.
- TWO CPUs different - i9 7960x and i7 7820x
- LN2 disable
- visually there is no damage or damaged track.
- the motherboard turns on and off and the LEDs all light up.
- probelt test voltages: RAM_CD / RAM_AB: 1.20v - PCH: 1.00v - VIN/VSA: No voltages.


Always CODE 00 in LiveDash. could anyone help with something?

[tistou77]

Code 00 is a CM or CPU problem (most often dead) 😞

[henriamolv]

tistou77 wrote:
Code 00 is a CM or CPU problem (most often dead) 😞

What is CM?

tried two different cpus got the same code

[tistou77]

henriamolv wrote:
What is CM?

tried two different cpus got the same code

Motherboard (CM in french for "carte mere") 😉

[restsugavan]

henriamolv wrote:
What is CM?

tried two different cpus got the same code

Maybe LGA socket pin bent or burnt ?






LGA 2066 socket pin contact may bent or some burnt area.

[henriamolv]

restsugavan wrote:
Maybe LGA socket pin bent or burnt ?


Not bro. socket with not signs of burn or pins damaged.

the motherboard was in use with the cpu working properly. it was after a shutdown and psu replacement.


an R6EE will arrive for me in Agust. but I would like to identify what happened to this R6E. I believe it's the motherboard as I test with two different CPUs.