03-24-2018 03:04 AM - last edited 3 weeks ago by ROGBot
03-24-2018 06:14 AM
SUN75 wrote:
*Hi guys,
After upgrade BIOS to 1301 my motherboard cannot boot.
I have random errors every time when try to boot. Like Nvram error or VGA bios loading or another.*
03-24-2018 08:44 AM
MirceaForce wrote:
shut down pc remove cord from power supply wait couple of minutes no more then 10 min and at the back of your case motherboard you will find bios reset button hold it 5 sec after you enter bios again load optimal defaults f10 save and then see if this fix...if ok...make sure your bios settings are correct
03-24-2018 11:23 AM
03-24-2018 12:18 PM
SUN75 wrote:
Finally I fix this issue with modified BIOS 1201 from topic below. I clean CMOS and all is perfect.
03-24-2018 04:25 PM
MirceaForce wrote:
what modified bios non offcial ? with 1301 no boot or ?
03-25-2018 04:40 AM
SUN75 wrote:
No 1301 have not updated Cpu microcode so I installed 1201 with updated microcode.
03-25-2018 12:59 PM
03-25-2018 01:19 PM
SUN75 wrote:
Yes, now I upgrade to 1301 and hope do not lost my stable system again. 😉