New Bios 1401

[jrmcdou]

Currently showing under Windows 10 32 bit and a couple other OSs but not all.

ROG RAMPAGE VI EXTREME BIOS 1401
Improved DRAM compatibility.
Improved system stability and performance.
Updated ME firmware.

[tistou77]

restsugavan wrote:


Yes, I found it already. Now we can setting Tj Max Via BIOS Menu. It was " CPU MAXIMUM TEMP " .



With other microcode except "0200004D" we can select "CPU MAXIMUM TEMP" as "AUTO".
With "0200004D" we must manually setting "105" on BIOS. Thank you Master Tistou77. 😮

๊๊Update!!! Master Tistou 77 , Soupirelle



Look like UBUTool damaged some part of BIOS 1401 file bring temperature sensor read difference was "5" degree celcius.
after try to setting "105" degree celcius on those menu, It still don't change TjMax from 110 to 105 at all.
However when I'd trying to enter "99" degree celcius the TjMax down to 104 degree celcius after all.

Thanks for this feedback 😉
If you put 99°C for this option (indicated 104 under Windows), the temperatures are "good" (the same as with the old microcode) ?
You can not put 100 in the bios, to have 105 under Windows ?

Thanks

PS: you still have not got an answer from Intel?

[restsugavan]

Waiting someone to fixing these issue master tistou77.*
*

[tistou77]

Ok we will wait, thanks 😉
Did you look for the option in the bios ?

[restsugavan]

I’m looking for that soon.

[tistou77]

Ok 😉

[restsugavan]

ํYes Master tistou77 , Hope they will answer us soon.:o

Here is my question link https://communities.intel.com/thread/127093

[tistou77]

restsugavan wrote:
ํYes Master tistou77 , Hope they will answer us soon.:o

Here is my question link https://communities.intel.com/thread/127093

Thanks 😉

And for ?

If you put 99°C for this option (indicated 104 under Windows), the temperatures are "good" (the same as with the old microcode) ?
You can not put 100 in the bios, to have 105 under Windows ?

[restsugavan]

No master tistou77 , I able to put 100 to have 105 under Windows but I'm not sure the number told us correctly. So I decided to playsafe by set " 99" to avoid overheat 😮

[tistou77]

Ok thanks, I will test and understand the temperatures with the microcode 49 and 4D, see if it's the same (changing the option) 😉

[tipes]

Think I would like to go back to earlier bios, and microcode to get performance back, and ignore the risks.
How best can I do this please? which bios?, and microcode?
I will uninstall Microsoft patch too.

Any advice welcome - thanks.

Mark