Marvell Aquantia 10G AQC107 Firmware Update 4.2.29

[vmanuelgm]

Hi mates.

Prior to downloading the firmware update, u must install 2.2.1.0 drivers, here is the link for these drivers:

https://mega.nz/file/1iZQhTIb#VjGa_OdlpfytsQ_4Cywh8mD1fXKDi9MsM1ZldkqKFm0

It is convenient u update to new Firmware coming from version 3.1.100, u can download this prior version in this link in the case u haven't flashed it before:

https://mega.nz/file/dn4EWQ5R#Xi24jReEUilHvLrYndBueO8kklmAT9zgXnuJho8FAcc

Next u must download the new Firmware for Aquantia 10G AQC107, version 4.2.29:

https://mega.nz/file/06ZCxBBB#A-7wQC6iTx35mIK8x8o471exdmU9MeCSMaZGAN06rwM


Just extract the content to a folder, then open atlflashupdate.exe as Admin, put the number of your adapter, press enter, and let flash. Then restart and done. Sometimes a router restart and cables reconnection is needed.





If u don't see the image properly, download it to your pc.



Video:

https://youtu.be/vU_RgdLc-hE


Best regards.

[restsugavan]

Due there are many AQC107-n SKUs NICs on the markets.

The new revision (*** After Aquantia was acquired by Marvell Technology Inc.*** ) NIC ICs chip was different from the chip
that provide by ASUS R6E and older model of motherboards that applied AQC107-n SKUs.
:cool:

New revision chip always coming
with name
" Marvell FastLinQ PCIe NICs cards " .

For AQC107-n early revision chip. It was recommended by Marvell Technology Inc. to use
3.1.121 Firmware for the best and the 3.1.16 driver already WHQL approved by Microsoft Corp.
It was working very good with lastest Windows 11 Insider build as well.




Marvell Aquatia AQC107n Firmware 3.1.121 working very well with 3.1.16 WHQL driver




It was 100% compattible with Windows 11 lastest insider build.
So consumer release RTM must be OK.


There are products driver page link from Marvell Inc. below.
Please choose the correct SKUs and OS platform driver from the link below

Support | Driver Downloads | QLogic Fibre Channel HBAs and FastLinQ Ethernet adapters and controller...

[RSMAN]

Hello,

What is the latest stable firmware for my Rampage VI Extreme (Aquantia AQC-107 10G) with Windows 10 Pro?
Currently I have 3.1.90 and I could not flash in 3.3.121a (From Marvell) or 3.1.121 (From driver stations) or 4.2.40 (From driver stations)!
Every time I get the same message "No adapter can be updated"?
I try to make an update because my port does not work all the time at the start of the PC 😞

[RSMAN]

RSMAN wrote:
Hello,

What is the latest stable firmware for my Rampage VI Extreme (Aquantia AQC-107 10G) with Windows 10 Pro?
Currently I have 3.1.90 and I could not flash in 3.3.121a (From Marvell) or 3.1.121 (From driver stations) or 4.2.40 (From driver stations)!
Every time I get the same message "No adapter can be updated"?
I try to make an update because my port does not work all the time at the start of the PC 😞

I think I solved the problem with a rollback!!!
I had problems in 3.1.119 but I reverted to 3.1.90 and so far it works fine 🙂

[kraven72]

I have come across a new AQC107 fw 4.2.46 on Lenovo's website dated 16 March 2023 :

workstations :: thinkstation p series workstations :: thinkstation p620 Lenovo PC Support - Lenovo S...

Readme states :

Marvell AQC107 FW Package

Change log shows :

Release Notes
=============
4.2.46 Dec 1, 2021
Fixed changing operating-system state to "Quiesce" if host OS is in sleep or being restarted.
Stopped Dhcp release in case of link down when static ip is configured in exclusive mode.

4.2.45 Oct 7, 2021
Fixed broken text redirection feature for ssh and telnet mode

4.2.44 Sep 20, 2021
Increased the supported boot device settings from 7 to 8 and processing of boot configs is skipped if the number of boot devices is more than 8
Fixed Dash Server to enable on switching from shared to exclusive config and vice versa

4.2.43 Aug 3, 2021
Fixed Making DHCP leased IP visible in "IP-Interface" profile
Fixed Making DHCP leased IP visible in "AqDashConfig show"

4.2.42 Jun 10, 2021
Added support for DHCP IP in Exclusive mode
Removed getFields and simplified invokeMethod to optimize memory

4.2.41 May 31, 2021
Fixed Settable Threshold properties value returns NULL - Sensor Profile
Fixed Supported Thresholds property values reported as NULL - Sensor Profile
Fixed ImplementedFeatures value is NULL in Physical Computer system View profile
Fixed CIM_HostedCollection Assosciated role must be dependent - Software Inventory profile
Fixed CIM_ConcreteDependency role must be dependent for CIM_FilterCollection - Indication Profile
Fixed CTS issues for Watchdog profile
Fixed "Other Type Description" field is set to telnet/SSH for text redirection profile