Hello 🙃 same issue here
Any luck finding anything? I have an R6E and as I'm doing some major maintenance I figured I'd replace the CMOS since it's been over 5 years. My computer has spent many many months unpowered, and has been acting a bit funny on boot and having more crashes & stability issues lately (which is saying something).
I found this site that sells CR 2032s with pos/neg molex connector on it, no idea if it would work or if it's any good? ; https://www.xump.com/science/CR2032-CMOS-Molex-51021-0200-B.cfm
Is the battery in the board literally just a standard CR2032 with wires soldered onto a molex connector? Worst comes to worst I could just do that to a new regular CR2032 if that's possible I suppose. Any assistance, advice, help, or anything else would be great 🙂
Buy the new CR2032 battery for your RIG.
De-assemble your R6E ROG ARMOUR and it backplate first.
Do not forget remove ROG LED backplate before continue.
Lift up R6E ROG ARMOUR carefully. Then you'll find the CMOS battery placement. Carefully remove it then swap the new one.
Make sure your new CR2032 sealed before re-assemble your RIG.
Power on your rig then enjoy.
Setup BIOS once , setting the correct date and time , setting your overclock profile. Enjoy.