12-01-201804:40 AM - last edited on 03-06-202407:37 PM by ROGBot
Hello,
I seem to be having an issue when booting up my computer from a shutdown state.
When the computer is in it’s shutdown state and then powered on, the computer will boot, POST and then start to load into Windows 10 when all of a sudden the display will lose signal but the computer will still be running. When I force shutdown and turn it on again it will boot into Windows 10 fine. (Please see attached video showing the issue.)
Please note: Nothing is overclocked everything is running a stock. BIOS Version 1603
Things that I have troubleshooted:
Updated/Downgraded BIOS (New:1603 Old:1503)
Clear CMOS
Unplug/Plug Graphics Cards, Memory, SSD (M.2)
Updated/Downgraded Graphic Card Drivers
Clean Install of Windows 10 Pro
Used different display ports on the graphic card/ switched them around too.
Windows updated all installed
ASUS Drivers all installed
If anyone is able help or suggest anything that I have missed that would be greatly appreciated.
Computer Specifications: Intel Core i7-7820X Skylake-X ASUS X299 ROG Rampage VI Extreme G.Skill TridentZ RGB 32GB EVGA GeForce GTX 1080 FTW2 EVGA GeForce GTX 1080 FTW2 Samsung 960 EVO 250GB M.2 NVMe SSD (OS) Samsung 960 EVO 1TB M.2 NVMe SSD (Games) Corsair Digital ATX1200i Windows 10™ Professional Edition Acer Predator XB271HU 27” G-Sync IPS 2560x1440 @ 165Hz
I have same issue but unlike this friend i even dont get post until i shut the system down completely and then boot for the second time.
My setup:
- R6E Board - intel 7900x cpu - Asus Rog Strix 1080 TI OC GPU - 8x8 GB G.SKILL TRIDENT Z 3600 MHZ Ram - 2x Samsung 960 PRO + 6 TB Segate Barracuda HDD - Corsair AX1600i PSU - Sound BlasterX AE-5 Sound Card
2 Samsung NVME drives in PCH Raid 0 mode. (One drive in expansion card the other one on motherboard) So naturally i cant install samsung nvme drivers since its raid, i install intel drivers.
