cancel
Showing results for 
Search instead for 
Did you mean: 

Black Screen after POST, Reboot then fine.

Beauzinga_1
Level 7
Hello,

I seem to be having an issue when booting up my computer from a shutdown state.

When the computer is in it’s shutdown state and then powered on, the computer will boot, POST and then start to load into Windows 10 when all of a sudden the display will lose signal but the computer will still be running. When I force shutdown and turn it on again it will boot into Windows 10 fine. (Please see attached video showing the issue.)

Please note: Nothing is overclocked everything is running a stock. BIOS Version 1603



Things that I have troubleshooted:

  • Updated/Downgraded BIOS (New:1603 Old:1503)
  • Clear CMOS
  • Unplug/Plug Graphics Cards, Memory, SSD (M.2)
  • Updated/Downgraded Graphic Card Drivers
  • Clean Install of Windows 10 Pro
  • Used different display ports on the graphic card/ switched them around too.
  • Windows updated all installed
  • ASUS Drivers all installed


If anyone is able help or suggest anything that I have missed that would be greatly appreciated.

Computer Specifications:
Intel Core i7-7820X Skylake-X
ASUS X299 ROG Rampage VI Extreme
G.Skill TridentZ RGB 32GB
EVGA GeForce GTX 1080 FTW2
EVGA GeForce GTX 1080 FTW2
Samsung 960 EVO 250GB M.2 NVMe SSD (OS)
Samsung 960 EVO 1TB M.2 NVMe SSD (Games)
Corsair Digital ATX1200i
Windows 10™ Professional Edition
Acer Predator XB271HU 27” G-Sync IPS 2560x1440 @ 165Hz
20,209 Views
21 REPLIES 21

ThrashZone
Level 10
Hi,
Wonder if gpt disk format would do better with efi and said driver 😕
Don't look like gpt format shouldn't the efi partition be fat32 ?
[SIGPIC][/SIGPIC]

Deepbluee
Level 7
I have same issue but unlike this friend i even dont get post until i shut the system down completely and then boot for the second time.

My setup:

- R6E Board
- intel 7900x cpu
- Asus Rog Strix 1080 TI OC GPU
- 8x8 GB G.SKILL TRIDENT Z 3600 MHZ Ram
- 2x Samsung 960 PRO + 6 TB Segate Barracuda HDD
- Corsair AX1600i PSU
- Sound BlasterX AE-5 Sound Card

2 Samsung NVME drives in PCH Raid 0 mode. (One drive in expansion card the other one on motherboard) So naturally i cant install samsung nvme drivers since its raid, i install intel drivers.

Any idea?