One thing I've noticed after upgrading to the latest 1102 bios for this board is that my 7980XE no longer seems to reach the single thread performance as the previous BIOS, which I would just accept as part of the patch, but here's the thing---when I...
I am confused, do I need to install both the IRST and IRSTe? I am using 1 SATA drive and 1 NVME drive in the DIMM.2 spot. I see both IRST and IRSTe in the Asus download page.
I want to connect 3 fans 140mm NOCTUA's on that header...Is that safe? How much rampage VI extreme fan headers can take,1amp,2amp or? I'm being confusedMy other 6 fans Aer RGB NZXT 120mm can draw max around 11-12W on full speed...Have anyone any Ide...
HelloBios 1102 for RVIE is availableROG RAMPAGE VI EXTREME BIOS 1102Improved DRAM compatibility.Updated CPU microcode.*R-DIMM is not supported.http://dlcdnet.asus.com/pub/ASUS/mb/LGA2066/ROG_RAMPAGE_VI_EXTREME/ROG-RAMPAGE-VI-EXTREME-ASUS-1102.zipWhat...
It's not listed on the support page but it IS up. Have fun everyone.dlcdnet.asus.com/pub/ASUS/mb/LGA2066/ROG_STRIX_X299-E_GAMING/ROG-STRIX-X299-E-GAMING-ASUS-1102.zip
HelloWith a USB3 key plugged into the USB port 3 (ASMedia header of the motherboard) I have speed problems, at first I had a speed of about 95mb / s (normal) on the copy of big fileBut for some time, it starts at 4, 5mb / s to finish at 14mb / sWill ...
Ran a couple of tests to spot some performance degradation from the new bios. So far CB R15 and others didn't see any drop in performance. But XTU scores are waay down! On a 12-Core I scored ~3850 @4.6G I'm now consistently scoring at or below 3625 X...
Hi,I recently got the following configuration setup:CPU - i9-7980XERAM - 8x16GB = 128GB of RAM - G.Skill F4-3200C14Q2-128GTZS (https://www.gskill.com/en/product/f4-3200c14q2-128gtzsw)MOTHERBOARD - ASUS Rog Rampage VI ExtremeBIOS 1004I am currently tr...
HelloWhen I connect a 2.5" disk to the USB3 port of the case (USB3 header), it connects / disconnects without stoppingI tested with a PCH voltage of 1.0 to 1.08v, but still problems (at 1.08v, it is less often)To connect a 2.5" disk to USB3, it takes...
