Help
Rampage VI & Strix X299 Series
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Sign In to Post

X299 RE6 Aura or Live dash programs not working

I have the latest updates, both 1401 bios and all windows updates. I'm not sure exactly after which, but my aura and live dash programs won't open. Aura brings up a dialog box and says it encountered a problem. Tried to reinstall, same issue. Did som...

Disk order for Windows installation

HelloI have my OS installed on an Optane 900P (PCIe) and a Samsung 960 (on slot 2 of DIMM.2) for DATAI put the Optane on the 4th PCIe slot now (before it was on slot 2) and since when I install Windows, the Optane is on disk 1 and the Samsung on disk...

tistou77 by • Level 13
  • 1528 Views
  • 6 replies
  • 0 kudos

DiMM.2 stuck in PCIe Gen. 1

I have two Samsung 970 Evo M.2 drives in my DiMM.2 slot. One is working happily and Samsung Magician shows it's interface as "PCIe Gen. 3 x 4" The other, in DiMM.2_2, shows "PCIe Gen. 1 x 4" and is much slower. This also happens to be my OS drive....

Textret by • Level 7
  • 1100 Views
  • 1 replies
  • 0 kudos

Sound Issue-Headset vs RVIE sound card

Hi there...I tried to connect my Logitech G933 Artemis Spectrum headset with 3,5mm cable (rear line in port),and I get sound only on one side.It works fine on aorus gaming 9 and my phone.Is there any settings or whatnot that I should look into? Th...

Rampage Extreme VI causing computer freeze!?

So I built a new PC with the Extreme VI and every seemed to work fine at first. Used the computer for a couple of hours no problem. Then all of the sudden my PC froze. Screen completely frozen with still image on screen. With no response from any dev...

Rampage VI Extreme Code 00

Hello..I just bought a Rampage VI Extreme motherboard with Intel i7 7800x.The old setup was with Rampage V Extreme and i7 6800k.When I try to start up the PC it does start up and shut off and then starts up again.The error code I get is Code 00 and t...

GPU Support bracket for the X299 R6E

So I pulled the bracket out today and tried to install it and had some problems.First off I'm not sure if it came with screws because the normal PCI bracket screws are too short. I have a few extra long ones which should work but I end up only being ...