Rampage VI & Strix X299 Series

Question about Cpu_DIMM2 in rampage apex

Hello, sorry for my English, I wanted to ask you if I can put a Samsung 250gb evo in the cpu_DIMM2 connector to build a raid 0 with 3 Samsung evo of 250.The two Samsung 250gb evo drives are currently in raid 0 on the PCh_DIMM2.I have an i9-7900X proc...

R6A PCIe only at 8x

Just mounted the MB on title and updated everything about its firmware.I am not able to reach 16x with a GTX970 video card. Stuck at native 8x in UEFI informations.Tried every PCIe slot but no way.I hope it is the video card, even if I read that this...

Rampage VI Extreme - PC Won't Restart Nor Shutdown

Hi,First post. I was about to reformat and rebuild my PC. Ever since I updated to BIOS 1401 (cleared CMOS), did the ME firmware update (confirmed successful in BIOS), updated MEI software, and updated to Windows 10 1803. my PC will not restart or shu...

X299 RE6 Aura or Live dash programs not working

I have the latest updates, both 1401 bios and all windows updates. I'm not sure exactly after which, but my aura and live dash programs won't open. Aura brings up a dialog box and says it encountered a problem. Tried to reinstall, same issue. Did som...

Disk order for Windows installation

HelloI have my OS installed on an Optane 900P (PCIe) and a Samsung 960 (on slot 2 of DIMM.2) for DATAI put the Optane on the 4th PCIe slot now (before it was on slot 2) and since when I install Windows, the Optane is on disk 1 and the Samsung on disk...

DiMM.2 stuck in PCIe Gen. 1

I have two Samsung 970 Evo M.2 drives in my DiMM.2 slot. One is working happily and Samsung Magician shows it's interface as "PCIe Gen. 3 x 4" The other, in DiMM.2_2, shows "PCIe Gen. 1 x 4" and is much slower. This also happens to be my OS drive....

Sound Issue-Headset vs RVIE sound card

Hi there...I tried to connect my Logitech G933 Artemis Spectrum headset with 3,5mm cable (rear line in port),and I get sound only on one side.It works fine on aorus gaming 9 and my phone.Is there any settings or whatnot that I should look into? Th...

Someone must say this: the king is naked! (Rampage VI Extereme)

The top board, with top price and so lot of problem!- XMP profile - falsed- u.2 port - falsed- PCH and m.2 under decorative cover = overheatingNetwork adapter, bluetoooth adapter, freezes, VRM temperatures and lot lot of other small and big mistakes....

Rampage Extreme VI causing computer freeze!?

So I built a new PC with the Extreme VI and every seemed to work fine at first. Used the computer for a couple of hours no problem. Then all of the sudden my PC froze. Screen completely frozen with still image on screen. With no response from any dev...

Dumb Question: Rampage VI Extreme and USB-C as Display?

I'm guessing this can't work because it requires an iGPU of some variety on the CPU? Or is there some driver I can DL somewhere that makes it work properly in Windows?

Forum Posts