Rampage VI & Strix X299 Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Aquantia AQC-107 10G v2.1.17

The windows 10 64 driver for the 10G NIC on the board doesn't seem to work properly.Using the v2.1.17 driver from their website I cannot print anything on my printer! Weird... I can print OK with the 1.40.42.0 driver which Windows 10 automatically ...

Random code 29 on post

Hi. I have been having issues with post freezing on code 29 randomly when memory clocked higher than 2800Mhz. It occurs on cold boots, reboots, and wake from sleep. Tested with only memory overclocked to rule everything else out. Tried setting System...

ichee by Level 9
  • 4807 Views
  • 8 replies
  • 0 kudos

Issue with microcode on 9820x

I just bought a 9820x and I noticed that the BIOS shows the microcode is 00000000.I previously had a 7900x and the microcode was shown correctly.When Windows is booted, the correct microcode can be seen in aida64 and, thus far, the cpu is performing ...

80234 80233
ichee by Level 9
  • 1353 Views
  • 2 replies
  • 0 kudos

M.2 Install to Rampage VI E - Omega HELP

Hi Guys,Firstly I've just finished my new build with the Rampage VI Extreme Omega Motherboard.First power up was a success. But windows failed to install. BSOD.... Ended up having to disable the Wireless adapter.Anyhow my question is, I have installe...

LiveDash 1.05.02 - Asus device not found

Just installed LiveDash 1.05.02, and when I try to start it I get a message box saying "Asus device not found". The program closes after that.Re-installed LiveDash 1.01.09, and it works ok, so it doesn't seem to be a hardware problem.MB: Asus Rampage...

Inkar by Level 7
  • 1850 Views
  • 0 replies
  • 0 kudos