Hello,i got a 10980XE, i can get the old Rampage VI Extreme (Bios 3006) for a good price and i want to know if it is still a good choice.I know all her advantage (U.2, 10G Lan, 5 PCI Express port, Thunderbolt 3 support, 256Go RAM support), but for OC...
If you use Intel's XTU it was just updated. Intel recommends the new version due to a security flaw. Probably supports new CPUs too. Just FYI.https://downloadcenter.intel.com/download/29183/Intel-Extreme-Tuning-Utility-Intel-XTU-
In a nutshell:1. PC was crashing on a daily basis with no apparent hardware issues (temperatures fine, HWMonitor reporting no problem/memory tests and drive tests showed no problems).2. New BIOS 3006 cannot be used because it has the CPU overclocke...
When the PC starts up, the rainbow colors are active. Is it possible to change this so that a fixed predefined color is always used at startup?
I have two USB 3.2 Gen 2 SSD and Two USB 3.2 Gen 2 HDD that work perfectly on the red rear USB 3.2 Gen 2x2 connector, but getting them recognized by both front and rear USB 3.2 Gen 2 and Gen 1 ports is more miss than hit. Other symptoms:-- All ...
Hello, I recently installed and have been trying to figure out how to disable the red LED's in my ROG dimm.2 module, supplied with my Rampage 6 Extreme Encore motherboard. I figured with having a custom loop, using the dimm.2 module would be the bes...
At least since installing the week old 3006 BIOS (but maybe before that, I'm not absolutely certain it's only since 3006 but think so) with my rig Windows power setting set at Power Saver and the BIOS settings all at default (no overclocking at all) ...
I’ve just ordered one of these boards and want to be prepared for when it gets hereI typically like using all the power connectors. There is conflicting information over the 6 pin mystery connector all over the net. One thing I am sure of is it’s not...
Hello,I have a problem with my computer...When I will start, I have only a black screen.I have the standby power LED in red (orange) but I have no POST State LEDs like in the pictureI don't know it it's because the MB or CPU is dead? Or another reaso...
Hello!I had all of my Thermaltake RGB fittings chained into the 12v RGB Headers on my motherboard for well over a year now without issue. Then they all of the sudden just stopped working. I changed the RGB headers to be in another plug and it didn't...
