I will buy Rampage VI Omega / Encore
I am interested in purchasing the Rampage VI Omega or Encore full box version. I am asking for information with a private message.:)
Forum Posts
Boot issue with rampage vi extreme encore
HII have a question about Boot between AHCI and Intel RST Premium mode.In this picture we can see a lot of drives to be selceted for boot . It is AHCI mode****************************************************In this picture we can see the drives that ...
R6EO and BIOS 3006 performance falling
The BIOS of R6EO was recently updated to version 3006, but memory speeds have dropped considerably compared to version 0802, all the Settings are the same, with the exception of memory voltage, frequency, timing (18-22-22-42) and tRFC, memory second ...
BIOS 3006 and Windows 10- Version 2004
Has anyone who had issues with BIOS 3006 and who had high, stuck CPU clock speeds tried this BIOS 3006 with the new Windows 10 2004? And if you have tried it, does your system now work properly?Thanks in advance for any thoughts/info/replies.
Wake on wlan for x299 deluxe
Dear ASUS' team, I have installed win10 and QCA9008 wifi chip on the board support wake on wlan in the driver.However, it's still not function because the BIOS is not support, would you please add the selection to BIOS?
Initial Setup - ROG Rampage VI Extreme Encore
Hey guys.Not totally new to the Rampage series of motherboards, but totally new to actually optimizing them.Is there anything in the BIOS I should initially change to make it run better or boot faster?Thanks y'all.
rampage Vi extrem encore turning on
Hello,my pc is turning on by itself any clues on what it can be ? i have not configured for that.any help, i no this is vague but if it happened to any of you please help me outcheers
Cascade Lake-X 22 cores ?
HelloInformation was passed on a CL-X 22 cores (and maybe more)Any news about this ?And the next gen, Icelake-X I believe, which seemed to be planned for the end of 2020, will probably be postponed ?Thanks
Sata ports on r6ee
Hi everybodyIn the BIOS/UEFI menu ADVANCED then PCH STORAGE CONFIGURATION one can see the sata ports.I have installed 2xSSD Samsung 860, 2 raid 0 (one with 2xSSD one with 2xHDD) and 1xCD/DVDROM. So 7 on 8 ports are used.My problem is that all the sat...
Adaptive Mode and Cascade Lake-X
HelloNo one has managed to use Adaptive Mode with a Cascade Lake-X ?It would seem that it was very complicated, because of the table of VID too high with this CL-XThanks
