BACK GROUND: This all started out to make use of my ROG Rampage VI x299 motherboards VROC Technology using the required Intel VROC Hardware key module.FACTS: USING the ASUS Motherboard RAID Configuration Guide: 1.1.4 Steps for a VROC HW key UEFI BIOS...
I posted this in the Hardware and Advice but, found this area and thought it would be better suited here.Hello Everyone,I wanted to start with saying everyone here is great. The info I have found here has helped me troubleshoot some issues previously...
Hello, I was hoping someone with knowledge in this particular area could chime in. When I first purchased the ROG Encore motherboard I updated BIOS and noticed a few things other than lesser performance on benchmarks, particularly being the Intel tu...
Hi,i use the latest BIOS 6003, if i set Aura in BIOS to off, when PC is off, it will be set to default On after each new Start In Previous Bios 5005 it works as set it Anybody have a Solution or figure out the same?RegardsAlöx
Anyone running VROC on DIMM.2 with a pair of 905P M2 drives?If so did it take using F6 drivers at win install?*
Hello fellowsI've got a relatively new build with an Asus x299 strix gaming -e motherboard, Intel I9-7900x, 32G ram, Windows 10 Pro 1909.I updated the bios to 3006 this afternoon and now when it boots I get 'ITBM Driver Unavailable' error when I logi...
The Q fan bios control has DC, PWM, and AUTO modes. I have mine on AUTO which I think is PWM. The manual is not clear on this. My question is does AUTO equal PWM setting? Thanks.
I'm confused on the 6-pin EATX12V_3 on page 1-29 in manual. My first email back from Asus said that the manual is wrong and to use a PCIE connector. I then got 2 other emails from Asus saying that the manual is correct and verified.6-pin EATX12V is ...
Just a heads up. Haven’t tried it yet myself.*ROG RAMPAGE VI EXTREME ENCORE BIOS 0603 "update Microcode for Intel security. Before running the USB BIOS Flashback tool, please rename the BIOS file (R6EE.CAP) using BIOSRenamer."
My bios 1 was trashed in an attempted update so I switched to Bios 2 and have fine tuned it. Now I want to copy bios2 to 1 so I can try to update it again. Any way to quickly do this?
