Rampage VI & Strix X299 Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

R6E BIOS "forgets" LED's setting

While getting my R6E setup after swapping out to a used MB I noticed when I change the BIOS setting to turn the MB LED's to OFF when in sleep or power off, it only works once after a shutdown. Subsequent shutdowns the MB LED's (under the armor plates...

GEEKCPA by Level 8
  • 1482 Views
  • 4 replies
  • 0 kudos

Fried my R6E LED's?

I just got my custom loop R6E back together, putting a new CMOS battery in it (required some splicing, soldering, and an external battery holder), replaced the two 1080Ti's with a single 3090Ti, upgraded the CPU to a 10980XE, refilled all the coolant...

GEEKCPA by Level 8
  • 1163 Views
  • 5 replies
  • 0 kudos

Rampage VI Extreme Encore fan speed issue

Greetings - I just did a new build with a Ramage VI Extreme Encore and Be Quiet 802 with Be Quiet Pure Loop. Problems with getting any control over fan speed. Updated the MOB BIOS to 1004. No matter what I try (PVM/Auto) I cannot get the fan sp...

jfeiber by Level 7
  • 4696 Views
  • 10 replies
  • 0 kudos

Upgrade 7900X to 10900X?

While my Rampage 6 is down waiting for a CMOS battery holder, I considered upgrading the CPU to a 10900X. It's about $600 for this CPU. Will I gain significant performance over my existing 7900X? I am also replacing my SLI 1080Ti's with a single 3090...

GEEKCPA by Level 8
  • 1107 Views
  • 3 replies
  • 0 kudos

Asus omega error hdd code d6

I have no idea what’s going on, but I’ve had this problem for quite some time now. Basically I turn my computer on, it passes the cpu check vga check, however my screen stays black. Usually after the vga check the ASUS logo pops up on my screen and b...

Open RGB

HelloHas anyone ever tried this program for RGB ?Instead of Aura or Armouryhttps://openrgb.org/Thanks

tistou77 by Level 14
  • 6066 Views
  • 6 replies
  • 0 kudos