HelloWith 7940X, I have 2 cores, (3 and 13) which are ~30° warmer for others (stress test) :mad:, the others have very good temperatureThe application of the LM to redo ?If so, do I have to clean the LM (how ?) first before putting it back ?Or can I ...
Hi all,After much instability and issues, I've come to realise the Noctua NH-L12 cooler I'm using, is thermally under-rated for the 7920X at either full-load, or even with Asus' MultiCore Enhancement (MCE) option enabled.coretemp-isa-0000 ...
MFC Mode Override / OS Native SupportWhat does this option do? Which one to choose? It's located at CPU power management below Intel Speed Shift and I think it is related to that, but neither google nor the users manual held any information at all ze...
When the SATA controller is set to AHCI what is the latest Intel driver to install.It use to be the latest Intel RST driver, but is that still the case?
Hello guys how to disable disable intel turbo boost max technology 3.0 driver from starting at startup forever not showing again ? on rampage vi extreme intel speed shift is disabled in bios.....is there a way ?
Trying to install USB Asmedia drivers. This is the message. Also noted for the Intel driver too.
Dear allI build up a new rig with X299 rampage VI board and g.skill RGB 4x 8GB 3866 with timings 18-19-19-39.So when I use XMP settings in Bios - my USB 3.0 doesnt work - only USB 2.0 (on same ports). No USB 3.0 device is detected.I lowered the Ram f...
Hi,After doing the Fall Creators update on Win10 (I was forced ...) I can' use the Windows Shut Down under Start anymore; it "tries" but after a few seconds the screen re-appears. Same case with Hibernate.This seems to be a known issue looking throug...
Does anyone know what the Bios settings would be to activate the Dimm.2 for a secondary M2 slot while allowing me to use my main HD in the M.2 Slot.
I'm at the stage in my build where I'll be cutting and bending tubing. I plan to use Mayhems Aurora Silver, and noted on the bottle they recommend using a filter. Is this really required? If I should insert a filter in the loop what model should I ...
