09-27-2016 02:10 PM - last edited on 03-06-2024 01:36 AM by ROGBot
09-27-2016 04:58 PM
09-27-2016 06:06 PM
09-27-2016 08:01 PM
09-27-2016 08:06 PM
GDoC63 wrote:
I'm a bit old school and recall when powering up a cool computer it actually applied thermal stress to the components, at times, leading to failure.
Having said that I almost never shut my workstation down unless making a HW change. I also take part in BOINC so I use that as justification for the high electricity bills. 😉 I'm on my computer between 12-16 hours a day on average.
I also have an ASUS ROG laptop, when not on AC I've set it to go to sleep upon cover close, then after 2 hours shut down.
09-27-2016 10:27 PM
09-29-2016 02:50 PM
gustmi4 wrote:
I wouldn't say thermal stress during startup counts for much theese days, as long as the ambient temperature ain't unnormal. Sure, it could have an effect over long time, but I would say your computer is over and done with long before that makes a difference.
The important part is of course to keep your case/parts adequately cooled.
If what you mean with low voltage is that the psu would detoriate with time and by that give you lower voltage. I would once again say you will have a dead psu before you get lower voltage output just by having your psu connected to the wall.
It's the stress and heat that will detoriate the psu over time. So if you have an undersized psu with poor components, that's what will cost you.
Getting a good psu also usually gives you a long warranty. See the links for more info.
If you mean undervoltage as in the ac voltage dropping, I can't see how that would affect your psu while it is shut down.
Consider getting an UPS if there's voltage and frequency differention in your powernetwork and you want to stabilize it.
The UPS would also protect you from powersurge and brownouts which are harmful for a computer.
The benefit of shutdown is a clean boot and no worries about loosing anything "in progress".
The benefit of sleep is a quick wake up time.
Nate152 sums it up well.
If you want to read up on PSU's in more detail this is a good article:
http://www.tomshardware.co.uk/power-supply-specifications-atx-reference,review-32338.html
I hope I got it somewhat grammatically correct as I am posting from my mobile. 🙂
Tier list of psu's (good and bad psu's, with links to examples of bad psu):
http://www.tomshardware.co.uk/forum/id-2547993/psu-tier-list.html
09-27-2016 06:03 PM
09-28-2016 04:22 AM