Driver's installation order?

[Camus]

Hi Guys

Just wondering which order is better to install drivers in order to avoid some issues? Of course after win pro 7 pro 64 bit is installed

I Ask because is I'm having some issues with bios 1408 in RAID 0

These are the issues i have detectect:
1.- Cant hit F8 to istart windows in safe mode. System get a black screen and get hang up
2.- Im very confused about drivers, dont know which one i should install. intel rapid start technology or Intel Smart Connect Technology or Raid 0 driver or just install one of them
3.- When I install the 3 of them i got problems with system restart, cant get back to windows and i get 62 Q code which according with users guide book means "Installation of the PCH Runtime Services" but i dont know WTF means?

I tried different things: system restore in win7, unistalling and installing drivers again, Enable and Unable the IRST & ISCT in the bios, Default settings in bios, with some mid OC and problem still remain

It could be the BIOS 1409?

Thanks in advance

[HiVizMan]

May I ask a question before I answer you. How are you setting up your RAID array in the POST and BIOS first?

[Camus]

Thanks

Hi. Let me make some background.

My fisrt bios was 1204 and i stalled raid 0 in the beginning, but didnt work because i had some problem with my ram modules, so finally i installed win 7 in just one ssd (non raid 0). I did this in order to minimize the issues of a clean installation. I ran this bios just with light OC.

Then came bios 1309 and i ran also with one disk, but i decided to go further with the OC and my memories modules ran stable a 1866 mhz ( i investigate on the internet and found this article http://www.overclockers.com/memory-overclocking-guide-ivy-bridge) All my problems went gone with this article.

After that bios 1408 was realese and i decided to go with RAID 0 this time, because i get familiar with the bios and so am I here.

I enable the RAID on the bios, exit and saving new settings on the bios, then during POST i hit ctrl + l and create the RAID. Then insert cd windows to install it and after that i start to loading drivers.

[Camus]

I had to install again win7. But prior i had to quick format my 2 ssd. Then I installed Chipset driver V9.0.3.1021 as a first one. Then the SATA driver V11.1.0.1006 (Asus Web Page) this one has IRST. If you install the last one from intel site V11.2.0.1006 does not active the IRST

After this 2 driver installed you can install the rest of them... And after 2 weeks of having no issues i can say that RAID 0 runs nice in Bios 1408.

Thanks anyway.

[HiVizMan]

Thank you for the feed back - your reply showed that you clearly understood the process and had done it correctly.

Enjoy your system my friend.