cancel
Showing results for 
Search instead for 
Did you mean: 
1,177,783 Views
634 REPLIES 634

staszenko
Level 7
for me still same problems. seems like asus cant fix anything 😐 https://www.youtube.com/watch?v=9s9j9eALODs&list=UUDrDN2yM2j7wx7vAKtbrnEg&index=1

here video :S

tostitobandito
Level 7
New version still uses enough of the CPU (around 3%) when the DRAM is connected to Aura that it prevents the CPU from stepping down to idle frequencies. Still have to leave DRAM disconnected on its default scheme for this reason.

In my case I have a 9900K running at 5.1 GHz and with Aura Sync connected to the DRAM the CPU will be just busy enough so all 8 cores stay at 5.1 GHz all the time on an idle machine. If I disable the DRAM in Aura the CPU usage instantly drops to next to nothing and my CPU cores immediately throttle down to their idle state of 800 MHz as appropriate (or somewhere in between depending on load).

Asukaylink
Level 7
AURA Sync 1.07.35 does not work with HyperX Predator RGB :mad:

Asukaylink wrote:
AURA Sync 1.07.35 does not work with HyperX Predator RGB :mad:


So annoying isn't it! Asus really should post the changelog so we know what has been changed , then we can decide whether or not to upgrade.

This is becoming as bad as Corsair Link is/was.

Disappointing 😞

So ive updated the new verison and i still can't change leds number of AURA TERMINAL like 1.07.22. After applying custom numbers it resets at 90 all the time. Syncing TERMINAL causes hard stuttering using Comete, Wave,Yoyo,Strobing effects across all devices. Developer team did amazing job as always! (no)
Thanks for aura in game mode off button. This orange stuff was annoying as fck in BO4...

Asukaylink wrote:
AURA Sync 1.07.35 does not work with HyperX Predator RGB :mad:


same here 😞 not detected in AURA Sync at all.

StaalVreter
Level 7
My install keeps hanging on 100% and does nothing...
downgrading cant be done either.

sledgep
Level 7
So have had this issue since 1.7.17 - light effects are very slow, even when set to the fastest speed, noticed the change at .17 and has persisted since. Other computer runs just fine effects are much faster set at the fasted speed.
My main is a Asus Maximus X Apex - 16 GB Gskill RGB Memory, Core i7K, Strix GTX1080 RGB, Asus Terminal for Addressable header.
My 2nd is a Asus Strix X299-E Gaming, 16 GB Gskill RGB Memory, Core i7K, Strix GTX 1060 RGB

Just upgraded both to 1.17.35 still the effects are very slow on the Apex, just fine on the X299 Also when going to the Music Mode and selecting Party my X299 with 90 LED addressable strip plugged into the onboard header, gives a sound level effect, multi color jumps up and down with the music, while all the rest of the LEDs have a red flashing effect. the Maximux with one 60 LED addressable strip plugged into the Aura Terminal port 1, and a 30 LED strip plugged into Terminal port 3 just give the flashing red light effect like the rest of the LED's. I would love to get the same effect, as it would look pretty cool with how I have my addressable strips attached to the wall.

Also like someone stated above, I am not able to save the number of LEDs in the Aura software, I change them, hit save, and it goes back to the setting of 90 for each header.

Thank you

The HyperX Predator RGB is not yet compatible with this version, only static, breathing and color cycle (the last two not synchronized), unfortunately. :mad:

cayde wrote:
The HyperX Predator RGB is not yet compatible with this version, only static, breathing and color cycle (the last two not synchronized), unfortunately. :mad:


With version 1.07.35 even static doesn't work any more. 😞