cancel
Showing results for 
Search instead for 
Did you mean: 

Deleted

MoKiChU
Level 40
344 Views
370 REPLIES 370

Mappi75 wrote:
Wondering - for me 1302 (Hero) works much better than 1105 - first time that 32 DDR4-4000 CL17-17-37-2N will run at full speed & lower voltages stable.


I do not know what to say. I've always done the usual procedure: Clear CMOS, BIOS update. Restart on Windows and shutdown. Again Clear CMOS and "restore" by hand the old settings: such as the frequency of the ram memory, the CPU voltage, etc .... Maybe there is something enabled or disabled by default that I haven't seen? :confused:

Two new things I noticed are within the BOOT entry that refer to RECOVERY.

1mluer
Level 11
1302 on my XI Apex is having issues with CPU throtteling. I turned on performance settings in windows and turn off speed step in bios as well as C states. it still throttles back and knocks almost a 1000 off my cinebench r15 scores. They went from 2300 to 1490

Anyone having issues with Throttling too ?
InWin 909 Silver RGB build
i9-10900k
ROG Maximus XII Apex
ROG Matrix 2080 ti
Gskill Trident Royal 4400 16g

Everything overclocked and love it.
ROG Awesomeness !!!!

1mluer wrote:
1302 on my XI Apex is having issues with CPU throtteling. I turned on performance settings in windows and turn off speed step in bios as well as C states. it still throttles back and knocks almost a 1000 off my cinebench r15 scores. They went from 2300 to 1490

Anyone having issues with Throttling too ?


Ok fixed it. I had to turn off all software control limits just under the XMP profile. 🙂

All good back to 2300 again 🙂


Now if I can just get the lighting service to run on cold bootup without having to be restarted and periodically crashing my game and itself, I would be perfectly golden. with AURA it's asking a lot over the last 10 months this issue has been around.
InWin 909 Silver RGB build
i9-10900k
ROG Maximus XII Apex
ROG Matrix 2080 ti
Gskill Trident Royal 4400 16g

Everything overclocked and love it.
ROG Awesomeness !!!!

Carlyle2020
Level 10
My 8086 runs fine. With and without power saving settings.
... Isn't the "turbo" function diretcly below the speed step setting? *wink, wink*

Regards
Carlyle

D_9
Level 7
Good day to all!
Is it possible to adjust the minimum speed on the connector W_PUMP from 30% of the speed, and not as it is now from 60%?

M2k1980
Level 7
im getting these high voltages on cpu system agent since i got my board with v0805, and my ram is only working fine with 1.37v or games exit without any messages

M2k1980 wrote:
im getting these high voltages on cpu system agent since i got my board with v0805, and my ram is only working fine with 1.37v or games exit without any messages


Did you try to manually set these voltages?

M2k1980
Level 7
yes ofc i did, i set to 1.10 and 1.15 and its working fine

MoKiChU
Level 40

MoKiChU wrote:
Hi everyone,

New BIOS 1302 [20/09/2019] for ROG Maximus XI Code/Extreme/Formula has just been released :





Thread updated.



Good news. I will wait on the OEM page gets updated so i can check it out. thanks in advance
Learn, Play Enjoy!