cancel
Showing results for 
Search instead for 
Did you mean: 

Deleted

MoKiChU
Level 40
351 Views
370 REPLIES 370

What's better to run LLC6@1.39v or LLC7@1.35v? Both are same voltage under load.

Mobber wrote:
What's better to run LLC6@1.39v or LLC7@1.35v? Both are same voltage under load.


I prefer to set lower LLC because higher LLC tends to generate bigger voltage spikes.

MoKiChU
Level 40

Retired
Not applicable
MoKiChU wrote:
Hi everyone,

New BIOS 1005 [09/05/2019] for ROG Maximus XI Code/Formula has just been released :



ROG MAXIMUS XI CODE : https://dlcdnets.asus.com/pub/ASUS/mb/LGA1151/ROG_MAXIMUS_XI_CODE/ROG-MAXIMUS-XI-CODE-ASUS-1005.zip

ROG MAXIMUS XI FORMULA : https://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/ROG_MAXIMUS_XI_FORMULA/ROG-MAXIMUS-XI-FORMULA-ASUS-1005...

Thread updated.


Hi;
What about ROG Strix Z390-F Gaming Bios ??

MoKiChU wrote:
Hi everyone,

New BIOS 1005 [09/05/2019] for ROG Maximus XI Code/Formula has just been released :



ROG MAXIMUS XI CODE : https://dlcdnets.asus.com/pub/ASUS/mb/LGA1151/ROG_MAXIMUS_XI_CODE/ROG-MAXIMUS-XI-CODE-ASUS-1005.zip

ROG MAXIMUS XI FORMULA : https://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/ROG_MAXIMUS_XI_FORMULA/ROG-MAXIMUS-XI-FORMULA-ASUS-1005...

Thread updated.


Is it safe to install? It is not at www.asus.com yet. And why "Armoury Crate" does not update itself or at least it's tools ?

MrAgapiGC
Level 13
oh! Well let see what is up! thanks
Learn, Play Enjoy!

Lotzi
Level 7
Is running here smooth on my Z390-F Gaming


https://abload.de/image.php?img=zwischenablage01xzjn6.jpg

xSneak
Level 7
Can't increase my twtr_L timing past 15 (windows result=16) in the bios. I have to increase twrrd_sg to get it to increase. This wasn't a problem on the past bios.

MrAgapiGC
Level 13
just installed. I have a question. Since las 2 bios, the seleccion of the NVME/m2 ports X2/X4 is not there. I will asume that is automatic 4X Correct? I only see hyper card and pcie number 3 2x x4 that is the pcie port. but no m2 ports
Learn, Play Enjoy!

MrAgapiGC
Level 13
Also, i have being looking with out any results of hte AMI nvme compatibility. that has to be on or off when a samung (that use a driver) is use???
Learn, Play Enjoy!