Asus rampage iv extreme socket 2011 error code 14

[ferendinus]

My problem is as follows. after the PC has booted up and works normally. After an hour or two and randomly it stops. When I try to reboot, the number 14 is highlighted on the display. The computer does not restart in any way ... Always error 14. To determine which was the faulty component I removed everything from the motherboard. Power supply only, cpu and motherboard. Always error 14. The PC only starts again after many hours ...
I have not applied any OC ... The bios version is the latest available..
I have already done the reset of the bios ... I have not solved
According to you what is broken ... CPU or motherboard? Thank you

[Arne_Saknussemm]

ferendinus wrote:
The PC only starts again after many hours

Just to be claer...if you get a code 14 and clear CMOS it still won't start for hours?

Have you ever replaced the motherboard battery?

[ferendinus]

Yes ... I replaced the battery .. It 'a month that I'm trying everything .. No solution ... The PC starts ... work ... then crashes ... restart ... error 14 .. .these starts again after many hours. I removed all the components ... motherboard power supply and cpu only ... error 14 and no boot. I bought a used cpu ... is coming ... I hope it is the cpu .. Error 14 is somehow connected with the memory of the cpu .. I hope this is

[Arne_Saknussemm]

And you tried only one stick of RAM at a time in the recommended slot?

[Silent_Scone]

If the above doesn't work:

1) Remove the CPU and memory

2) Reseat the memory and CPU whilst checking for any bent pins and even mounting pressure.

3) If none of the above help, remove the motherboard from the chassis and retest outside of the enclosure.

[ferendinus]

I did everything you said ... Clean the count of cpu ... used compressed air on the socket and all the slots ... pins ok .... I reassembled the pc ... after a few hours same problem .. I'd like to know if anyone ever had this kind of problem on a rampage.