Rog crosshair darkhero viii [problem]

[Msabsabi001]

I installed everything perfectly, reboots random and when you have headphones you can hear crash incoming like type of cringe sound tek tek, i tried to play with the bios sometimes i manage to make it stable but like when i run call of duty or low performance games it would stil’ crash specially when i try to stream on discord i used benchmark for cpu i dont see bo issue
Temperature doesn’t even go above 50degree 100% usage

My PC setup:
Windows 11
Bios version latest: 4201
Motherboard: *ROG CROSSHAIR DARKHERO VIII
CPU: RYZEN 5950X
RAM: *G.SKILL Trident Z Neo (For AMD Ryzen) Series 32GB (2 × 16GB) x2 (64GB Total)
GPU: EVGA FTW3 ULTRA 3080 TI (12B)
COOLANT:*ASUS ROG Strix LC I1 360 ARGB All-in-one AIO Liquid CPU Cooler 360mm Radiator
PSU: Evga 1000W*

*

[Megascrypt]

Bios 4201 is terrible that causes a quite a bit of issues for many users. Have you tried to go back to earlier Bios, anything but the 4201

[Msabsabi001]

Megascrypt wrote:
Bios 4201 is terrible that causes a quite a bit of issues for many users. Have you tried to go back to earlier Bios, anything but the 4201

i was using 39xx version before that but it didn't help any problem at all

[Nate152]

Try setting the Dram voltage to 1.38v - 1.40v.

Try S.O.C. voltage at 1.10v, if unstable you can slowly raise it .02v to a maximum of 1.20v.

Is this any better?

[Msabsabi001]

Nate152 wrote:
Try setting the Dram voltage to 1.38v - 1.40v.

Try S.O.C. voltage at 1.10v, if unstable you can slowly raise it .02v to a maximum of 1.20v.

Is this any better?

where do i set dram and soc voltage in the bios?

[Msabsabi001]

Nate152 wrote:
Try setting the Dram voltage to 1.38v - 1.40v.

Try S.O.C. voltage at 1.10v, if unstable you can slowly raise it .02v to a maximum of 1.20v.

Is this any better?

thank you,

So far looks stable, I will let you know if it crashes again, but why setting voltage helps ? im not a geek im trying to understand could you explain me please?

[Msabsabi001]

msabsabi001 wrote:
thank you,

so far looks stable, i will let you know if it crashes again, but why setting voltage helps ? Im not a geek im trying to understand could you explain me please?

*update*
no crash 2 days uptime and counting up more !

[Nate152]

I'm not too familiar with AMD motherboards but these voltages should be found on the extreme tweaker tab.

You may have to set them from auto to manual to enter a value.