I recently built a new TUF Gaming system but the problem is that ARGB TUF Logo on the LC240 AIO Pump doesn't seem to be working as it should. As you can see below, currently its ARGB cable is connected to the 3-way connector and plugged into 'ADD_GEN_2_1' port however there's no light on it at all but 2x120mm ARGB fans work with the Aura Sync. But if I disconnect AIO Pump's ARGB cable from the 3-way connector and plug it into the 4-pin 'RGB_HEADER' port, it only lights white in breathing mode. No matter what I do, which port I try, with or seperate from the 3-way ARGB cable, I couldn't make it work with the Aura Sync. I also tried reinstalling the Armoury Crate but nothing has changed.
Am I doing something wrong or missing something here?
Below is the schematic of my MoBo.
All LC240 ARGB fan cables are connected into 3-way ARGB cable and plugged into 'ADD_GEN_2_1' port. (11)
All GT501 front RGB fan cables are connected to each other and plugged into 'RGB_HEADER' port. (12)