04-08-2022 04:23 PM
04-10-2022 11:00 PM
04-11-2022 05:25 AM
STARRAIN@ROG wrote:
Hi Zardoc,
For the issue 1, please try turning off legacy USB support.
STARRAIN@ROG wrote:
Hi Zardoc,
For the issue 2, do you mean you get the disconnecting and reconnecting messages in the event viewer when reboot or shutdown the pc?
Is there the advanced settings in I225 driver V1.0.2.14 to disable connection loss messages in the event viewer?
STARRAIN@ROG wrote:
Hi Zardoc,
Is there the advanced settings in I225 driver V1.0.2.14 to disable connection loss messages in the event viewer?
STARRAIN@ROG wrote:
Hi Zardoc,
Have you tried Intel Ethernet Controller(I225) Driver V1.0.2.8 from our support site?
04-11-2022 08:03 PM
04-12-2022 05:52 AM
04-12-2022 08:01 PM
04-13-2022 06:17 AM
STARRAIN@ROG wrote:
Hi Zardoc,
All connected devices and peripherals are checked during POST, and USB device may cause delay in boot.
If you have concern about the booting time, please install the USB camera after boot into windows.
For the second screen, do you connect the both monitor to DP ports of the graphics card?
How do you set the second screen in bios and in windows?
For I225 driver, I'm sorry I'm not sure why Intel adjust the option in the version you mentioned.
If you are used to downloading drivers form Intel's website, maybe you can wait for the next driver update.
Thank you.
04-13-2022 07:27 PM
04-19-2022 06:11 AM
STARRAIN@ROG wrote:
Hi Zardoc,
Which bios versions did you use and the booting time was always within 15 seconds with a USB camera installed?
Is the bios default setting with the previous bios versions you mentioned and with bios 1402, 1301?
Are the devices you installed in all same as previous bios versions?
May I have the devices list and which port do you install the each device(such as a USB camera in USB 2.0 port 7)
Thank you.
04-20-2022 08:06 AM