i thought i had solved the issue
, it seems to be a conflict between the M2 slot and the GPU being used , i moved the m2 drive to the bottom of the board rather than the connector by the CPU and it booted straight away.
but after installing graphics drivers, PC froxe, then blue screened and now i have the same 97 code when booting with GPU plugged in.
May I double confirm it is still no boot and you get qcode 97 with GPU plugged in after moved the m2 drive to the bottom?
Have you tried other GPU and install other GPU?
Does it also occur on bios 0811 with bios all default settings?
Was it working fine with the same components?
Did it occur after update bios 0811 with bios all default settings?
Thank you for your reply.
If you remove SSDs and update to bios 0811 again with bios all default settings, is bios still crashed (froze) mouse wont move?
If it is fine without SSDs, please install SSDs and then try again.