I am trying to Overclock my 10900k but when I set my voltage to manual and it it at 1.35 in the bios, my monitoring software says I am shooting up to 1.525v. I am using HWInfo. Also on HWMonitor, cpuz all say it's reading over a volt higher then what I have it set at. Any idea why it is doing this? I turned off MCE so the board shouldn't be trying to take over. Most things are set to auto. I have xmp2 profile, 1.35v on ram, LLC 4, 1.35v on vcore and 5.2ghz. Not really any other changes in regards to the overclocking side of things.