Unable to boot with RAM DOCP overclock after bios update

[KappaDaRappa]

I just updated to PRIME X670-P WIFI BIOS 1616
Before I was running the stock bios that came with the motherboard. All my setting are default apart from the RAM overclock
I got 4x16gb 6000mhz RAM that were running fine with the DOCP profile at 6000mhz
After the bios update I can no longer use that profile every time I try to boot it says the overclock is unstable.
I played around with the settings and no matter what I do I cant get the 6000mhz profile working but smaller overclock boot fine. At the moment I increased it from 3600mhz to 4800mhz.

Any idea what could be causing this and how to fix it?

[Silent_Scone]

Hello,

Have you tried both DOCP I and II profiles?
AGESA changes can sometimes have an impact on stability. If you enter the UEFI check how much voltage is being applied to VSOC. Increase this by 20 to 40mV and see if the situation improves.