Two EK Water Blocks EK-XRES 140 Revo D5 works simultaneously?

[Koutport]

Hello,
I have one EK Water Blocks EK-XRES 140 Revo D5 and I have connected on my ASUS poseidon 1080ti with EK-CoolStream XE 120 (Single) .
I want to ask if I can connect the EKW-KIT RGB 360 kit to my i7 6950X and works (at the same loop) with the graphick card . I want If it can works simultaneously dont individually each kit.
Thank you.

[Menthol]

Sounds like you have a 360 and 120 radiators and combo pump reservoir, yes you can connect them into one series loop, should work great

[Koutport]

Menthol wrote:
Sounds like you have a 360 and 120 radiators and combo pump reservoir, yes you can connect them into one series loop, should work great

Yes , but I have 2 combo pumps reservoir in the same loop , can this cause problems to the all loop?

[Koutport]

Thank you very much.

[Arne_Saknussemm]

It shouldn't be a problem no...in fact a good idea for redundancy.

Ideally you would get something like this for the two pumps https://www.ekwb.com/shop/ek-xtop-revo-dual-d5-pwm-serial

But not strictly necessary. Try to match pump speeds as good as you can.

[Koutport]

Arne Saknussemm wrote:
It shouldn't be a problem no...in fact a good idea for redundancy.

Ideally you would get something like this for the two pumps https://www.ekwb.com/shop/ek-xtop-revo-dual-d5-pwm-serial

But not strictly necessary. Try to match pump speeds as good as you can.

Thank you I will try.

[ThrashZone]

Hi,
Yeah works great I believe
I use a pwm splitter on x299 on the pump port and channel 4 and channel 4 assist fan ports on x99
I had to get creative in a corsair 450D mid tower to do it though 🙂