Ram fit

[allocen]

Does 4x Hyperx Savage Low Profile 2400mhz fits perfectly with a motherboard Maximus Vii Formula and a cooler Noctua D14?

[Nate152]

Hello allocen

Yep the hyper x savage is compatible with the noctua NH-D14, click on the RAM compatibility tab.

http://noctua.at/en/nh-d14.html?comp=1

I'm not seeing the maximus vii formula on the compatibility list though.

http://noctua.at/en/nh-d14.html?comp=1

[allocen]

Hi nate, i see. So even on motherboard Maximus Vii Formula, shouldn't be any problem with the height, am i right?

[Nate152]

I just edited my post above and I'm not seeing the nh-d14 or nh-d15 on the compatibility list for the maximus vii formula.

http://noctua.at/en/nh-d14.html?comp=1

It must be compatible though here is someone who has it installed on the maximus vii formula, check his sig/specs.

http://forums.evga.com/Noctua-NHD14-fans-to-motherboard-cpu-fan-headers-m2226634.aspx

[allocen]

My pc is already built, the problem is with upgrading ram, i already have ram HyperX Beast on the first 2 slots, so in order to put another 2x hyperx beast on the last slots, it comes right under the latest fan so i have either to move up a little the fan or move it to the left, so rather doing that, i decided to sell my 2x hyper x beast and buy all 4 kits of hyperx savage 32 gb ddr3 2400mhz.

[allocen]

And before i make the order for savage, i need 101% sure that its going to fit perfectly on all 4 slots even if the cooler cover all 4 slots of ram.

[Nate152]

Yep it is compatible with the hyper x savage. 🙂

Click the picture a few times so you can read it.

[allocen]

Well there is compability, LGA1150

Asus

Maximus VII Formula \
found it

[Nate152]

Yep it is compatible with the hyper x savage. 🙂