R4BE - RAM shows up as Triple Channel

[PowerOver9K]

When I'm in CPU-Z or AIDA64 I see my memory as being Triple Channel. It's a 4x8 (32GB) quad channel kit of Corsair Vengeance Pro 1866. I have it in the correct slots per the manual. Anyone want to shed some light on this one? It shows all 32GB of RAM.

You can kind of make out what slots I have it in. Ignore my slop tube/wire job. I'm waiting a 3rd EK from Slovenia. 😛

[Arne_Saknussemm]

Yes that is either the board or failed IMC on the CPU...only way to tell for sure is swap one of them out....

Of course I would really blow that slot out with canned air too....just in case....it has solved problems before now....

[PowerOver9K]

Arne Saknussemm wrote:
Yes that is either the board or failed IMC on the CPU...only way to tell for sure is swap one of them out....

Of course I would really blow that slot out with canned air too....just in case....it has solved problems before now....

It's not the CPU. I put a XEON in there as well as I have a ton laying around at work. Same issue. I have the vendor Fast-RMAing the board for me. :cool: so it should all be good.

[Arne_Saknussemm]

Good stuff...always good to have spares about for testing 😄 sounds like you will be sorted soon...