Questions about fitment and ROG exchange !

[nomadVP]

Hey Guys,

i Just ordered my Asus V formula and Corsair 600T case along with a h100 cpu cooler, does anyone have this setup running push and pull and was able to make it fit ? i tried searching around and looks like alot of them were not able to run the push and pull setup on different boards and ram, i'll be using the Corsair dominator platnium series. This ram should fit. im thinking of using 4x 120mm fan for the push and pull setup.
coolermaster XtraFlo 120 Red LED

specs :

Dimension 120 x 120 x 25mm
Speed (R.P.M.) 800 - 2200 R.P.M ± 10%(PWM)
Air Flow (CFM) 34.02 – 93.74 CFM ± 10%
Air pressure (mmH2O) 0.43 – 3.30 mmH20
Noise 15 - 38 dBA
Bearing Type DynaLoopTM Bearing
Fan Life Expectancy 40,000 hours
Voltage 12V DC
Current (Ampere) 0.45A (0.7A MAX)
Power Consumption 5.4W (8.4W MAX)
Weight 102 g
Connector 4-pin
Accessory Rubber x 4
Metal screw x 4

pretty good for push and pull if u ask me, and also i wanted this over the corsair high performance fans is cause they have RED LED ! i want a red theme.

now with my other question, if i have a V formula board and download a bios profile ( same bios version ) from the Extreme board would this work? has anyone tried ? im wanting to run the i7 3770k @ 5ghz 🙂

[HiVizMan]

Not sure you will be able to run a 3770K safely at 5GHz even with the H100. You might luck in and have a very cool running CPU of course but I would not hold my breath. SandyBridge yeah no problem.

[nomadVP]

HiVizMan wrote:
Not sure you will be able to run a 3770K safely at 5GHz even with the H100. You might luck in and have a very cool running CPU of course but I would not hold my breath. SandyBridge yeah no problem.

Yeah, hopefully i get one that's a good batch. previously i had a i 5 3570k running 4.6ghz on air cooling no problems tested with Intel burn test, but yeah i cant find sandy bridge cpu around anymore..... i would love to have a i7 2600k

anyways back to my questions if anyone knows the above please assist cause my gear will be coming in soon so if anything i can still make changes !

[samual]

ncix.ca has i7-2600k in stock.

http://www.ncix.ca/products/?sku=57960&vpn=BX80623I72600K&manufacture=Intel

[nomadVP]

samual wrote:
ncix.ca has i7-2600k in stock.

http://www.ncix.ca/products/?sku=57960&vpn=BX80623I72600K&manufacture=Intel

thanks for the link, but im from australia, dont really want to buy over seas? and if i had to go through all that trouble i would get the 2700k lol, i will do a hunt though and see if i can find a 2700k anywhere in australia thats still lying around in the shops.

[HiVizMan]

Just let me know what BIOS you are using and I will boot up the Formula and save a bios for you.

[nomadVP]

HiVizMan wrote:
Just let me know what BIOS you are using and I will boot up the Formula and save a bios for you.

That would be a great help dude as im no pro over clocker ! i only know the basics so if you could put something together for me that would be good, im wanting to use this ram, 2133 X.M.P mode.

http://www.corsair.com/us/memory-by-product-family/dominator-platinum-ddr3-memory/dominator-platinum...

This would work fine with the v formula and 3770k ? even not over clocked ?

[HiVizMan]

No problem, I will set XMP profile in the bios, and your system will use your ram to set up.

Let me know when the board gets there.

[nomadVP]

HiVizMan wrote:
No problem, I will set XMP profile in the bios, and your system will use your ram to set up.

Let me know when the board gets there.

Awesome, Thanks man.

Guys i'm still wanting to know if any of u have been able to fit the h100 into the Corsair 600T case using the Maximum V formula board !! please leave a comment if u know anything about this fitment,

[Chino]

Intel Core i7-2600K - $391.72 inc GST

I've seen a push & pull configuration on the 600T before. Just not the conventional method. To sum it all, the pull fans go above the grill (outside of the case) then the H100 with the push fans goes inside the case.

oooo(Pull fans)
--------(Grill - Case)
====(H100)
oooo(Push fans)