cancel
Showing results for 
Search instead for 
Did you mean: 

Question on the Alder Lake cool mod from Igor's Lab

ridethewhirlwin
Level 7
https://www.igorslab.de/en/alder-lakes-cooling-problem-bend-again-around-5c-ilm-mod-for-intel-lga170...

After reading this mod over and other sites covering this, there's no mention which boards are affected.

My question is has anyone with a Z690-A board or Z690 board in general tried this mod and saw favorable heat reduction results?
2,345 Views
2 REPLIES 2

Radical_53
Level 9
Simply put, all sockets will bend the CPU as they're all being made according to Intel's specs. The socket will only clamp the CPU in the middle, while the heatsink can deliver equal pressure to the whole CPU.
You shouldn't run into this issue, as per Igor's review, if you can mount a backplate before inserting the CPU. For all regular heatsinks though, the washer mod can help to keep the CPU "flat".
It's easily reversible, so you may just try it for yourself.

theroc44
Level 9
I just ordered the thermal grizzly z690 plate, gonna get it soon ill post results when I get it.