12-16-2024 05:46 AM
Hi ! I run a System with Ryzen 7800 X3D and ROG Strix B650e-e. When i enable any of the 2 availble DOCP profil's i get a Blackscreen and the PC w'ont boot. My RAM is a Corsair Dominator Platinum CMT32GX5M2B6400C32 (2 *16). On the Supportsite it says that this Kit is supportet.Typing in the needet Values (CL's & Voltage usw.) manuly does not fix it and lowering the MHz at 6200 or 6000 also does nothing.
I tryed another Kit (also allegedly suported) and get the same Problem. The 2 Sticks are placed in the correct Slots (checked user maual).The Bios is updatet to the newest version.
Has someone any idas how to fix this ?
12-16-2024 06:11 AM
I can not find that ram on the database
I do recommend ALWAYS to use expo ram for AMD and up to 6000mhz
There are others and they are NOT the same as yours.
12-16-2024 06:20 AM
There it is on the bottom
12-16-2024 06:48 AM
1. Set DOCP 2
2. Lower DRAM Frequency to 6000MT
3. Set VSOC to 1.3v and VVDIO to 1.45v
4. If no change, reseat the CPU - ensure for consistent cooler mounting pressure.
12-16-2024 07:09 AM
Sadly stil Blackscreen after the Settingchange. Thx for the Answers from both of you btw.
12-16-2024 07:24 AM
Check CPU mount. Can impact OC.