I guess, you pretty much are reaching the limits of your RAM kit... if it is rated at 3200 and you already reached 3333, then you're close to the end of it... You have to be very very lucky to pick a 3200 kit and run it much higher.
Intel has a more mature platform... I am not saying that it is impossible, just that you are lucky if you can run it even at 3200... anything above belongs to the extreme luck category...
My setup is
*CH Hero VI Motherboard
After so my struggle, I got it running at 3333mhz 14c and was wondering if anyone can help me run it higher with looser timing. I tried few but it won't boot anything higher than 3387mhz. *
Hi, i got these: F4-3200C14D-32GTZSK so, basically the exact same as yours. I only got mine to run at 3200, but the system wasn't stable enough, as prime95 was outputting rounding errors in its torture test.
q1: have you tried prime95 in your system? You probably should, as it is extremely good at detecting instability.
q2: would you mind posting the other numbers you used for your overclocking ? I'm also using a 1800x, so our setup is identical. I'm particularly interested in the voltages, procODT, and what frequency / multiplier you're running your CPU at.
I have the same kit i think only i have 16g 😞
loosen your timmings and check how high you can go.
I tried it like loosen I rise the timmins with 10 at first pushed it to the max. Then I tright to tighten them again. When i failed at some point i tried to compensated with more voltage.
basic 1 on 1 oc ..
But I dont get any preformance improve so its at XMP now.