I have a newly upgraded system with an AMD Ryzen 9 5900X CPU and ASUS ROG Strix X570-E Gaming motherboard. This is my first venture into overclocking an AMD processor. I know how to set the OC in the BIOS for all cores: currently I have it set to 4300 MHz with PBO on which keeps all cores at the same speed with no single core boost anymore. Is there a way to raise the base clock to 4300 MHz and still keep the single core boost at the default 4800 MHz or higher at the same time? I have a Thermaltake AIO cooler for the CPU which keeps idle temps around 48 C and can handle a lot of all-core load tested using Cinebench r23.
To set 4300Mhz
When you overclocking manually online:
1) set 4300 (Core Ratio) 43)
2) set 1.4 or 1.5
3) increase frequency upward until it is unstable and than lower the 100Mhz and repeat the increase voltage again to be stable
Please use AIO or water cooling system
I have overclocked Intel CPUs for years, so I already have an AIO cooling system. My question was not about setting all the cores to 4300 MHz stable, which I have already done using various stress testing apps. My question was basically if there is a way to move the Base Clock from 3700 MHz to 4300 MHz while still keeping the single core Boost Clock at the stock 4800 MHz. With no replies to this question it is pretty much what I already knew. I either have to leave it at the stock Auto setting which has the Base Clock of 3700 MHz with a single core boost up to 4800 MHz. I ran some tests at the Auto setting and the Boost Clock rarely went up to 4600 MHz, much less 4800 MHz. I have decided to keep the all core overclock at 4300 MHz and forego the Boost Clock as I feel my system performs much better overall this way.
This is good.
Would you mind sharing some of your benchmark results in single core and multi-core?
Hello to everyone,
I also have a 5900x processor. i just want to make pbo or oc to improve game performance. Which would you recommend and how would I do it? It was mentioned that there is a video on youtube can anyone give a link? I also use 2x16gb pny xlr8 brand 3600mhz cl 18 ram. how do i do oc for ram. Thank you in advance for those who reply.