- last edited on by
ROGBot
I posted this in Rampage forum received zero response.
The basic thing I want others to check - uncheck sensor in settings of AI suite- reboot system and click Digi +Powercontrol in Ai Suite II. Do you get that error listed above?
I7 5960X/Asus RE5u3.1 -3101/64gb(16x4)@3133 @1.39V Gskill 14-15-16-36 cr2/3xTitanX/ WD RE 6.0 TB RAID 0+1/Samsung 840 Pro 256 x2 Raid 0/Samsung 850pro M.2/Asus Essence One/Corsair Ax1500 PSU /Corsair Obs 9800D case/ 3 2xRad 120x3 and 120x1/ EK MB block/AquaC Kryos CPU/Koolance GPU x2/ Bay 452x2(ver2) (2x655 serial)
Hey, I am wondering if anyone has received "Access violation at address 039BF3A3 in module 'DigiPowerControl.dll' blah blah" on their Digi +power control in your AI suite II (new version too)
I actually stumbled upon this last night, if you go into settings /Monitor/Sensor (v1.00.07) and uncheck it then try to use Digi +Power Control (after AI suite restart) and did anyone receive a similar error? (Also test after a full reboot)
Just wondering if, repeatable by others, why would Asus not disable Digi +Power control tab upon unchecking Sensor... or is this just a bad bug.
Just looking if others with working AI Suite II are getting this error. 😄
Thank again.
The basic thing I want others to check - uncheck sensor in settings of AI suite- reboot system and click Digi +Powercontrol in Ai Suite II. Do you get that error listed above?
I7 5960X/Asus RE5u3.1 -3101/64gb(16x4)@3133 @1.39V Gskill 14-15-16-36 cr2/3xTitanX/ WD RE 6.0 TB RAID 0+1/Samsung 840 Pro 256 x2 Raid 0/Samsung 850pro M.2/Asus Essence One/Corsair Ax1500 PSU /Corsair Obs 9800D case/ 3 2xRad 120x3 and 120x1/ EK MB block/AquaC Kryos CPU/Koolance GPU x2/ Bay 452x2(ver2) (2x655 serial)
