Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

OC Corsair Dominator GT 16Gb 2400Mhz

Metaltoby
Level 7

‎10-25-2012 02:25 AM - last edited on ‎03-05-2024 11:39 PM by Community Admin

I want to overclock the CDominator GT to 2400Mhz!

System
Case: CM Storm Trooper
Mobo: Asus Rampage IV Extreme
RAM:CorsairDominator GT 16GB DDR3-2133 CL9 quad kit
CPU: Intel Core I7 3960X
GPU: 3x Sapphire Radeon HD 7970 3GB
SSD1: OCZVertex 3 Max IOPS 120GB
SSD2: OCZ Vertex 4 128 GB
HDD: Samsung 1TB, Samsung 500GB
PSU: EnermaxMaxRevo 80+ 1500W
Monitor: DellUltraSharp U2711
OS: Windows 7 x64.

24/7 Bios
CPU ratio: 46
Bclk freq.: 100
Vcore 1,37V
all DRAM: 1,5V
CPU VCCSA: 1,23
CPU PLL: 1,7V
VTT CPU: 1.2V

I've have tried the bios on auto with the DRAM voltage on 1,65 and DRAM freq on 2400Mhz = failed

Is there anybody who can help me to reach the 2400MHz?

Thnx in advance...
l Asus Rampage 4 Extreme l intel 3960X@ 4800Mhz (1.4 volt) 24/7 l 3x Sapphire HD 7970 1200Mhz/1600Mhz Corsair Dominator GT 16GB DDR3 2133 CL9 l Enermax Max Revo 80+ 1500W l OCZ Vertex 3 Max Iops 120Gb l l OCZ Vertex 4 128GB l Samsung F1 1Tb l Samsung F1 500GB l Corsair H100 l CM Storm Trooper l Dell Ultra Sharp U2711 l 2x Verbatim Store N' Go 2 TB USB 3 l Dell Ultra Sharp U2711 l Logitech X-230 l
Labels:
0 Kudos
46,793 Views
26 REPLIES 26

Daveo
Level 11
In response to Metaltoby

‎11-08-2012 02:16 PM

Metaltoby wrote:
I Followed your advice and i only loosen the timings to 10-11-11-28 and afterwards the system booted up.

I did a memtest at 2400 MHz. No errors found!

Thank You very Much mate!


no worries mate glad to help out.
0 Kudos

ivan121x
Level 7
In response to Metaltoby

‎02-23-2014 04:08 PM

Metaltoby wrote:
I Followed your advice and i only loosen the timings to 10-11-11-28 and afterwards the system booted up.

I did a memtest at 2400 MHz. No errors found!

Thank You very Much mate!

13485
that you used for the ram voltages?
0 Kudos

HiVizMan
Level 40

‎11-09-2012 12:32 AM

Well done to all involved.
To help us help you - please provide as much information about your system and the problem as possible.
0 Kudos

Daveo
Level 11
In response to HiVizMan

‎11-09-2012 06:04 PM

thank you, you too!
0 Kudos

Stu
Level 10

‎01-07-2013 09:32 AM

Great topic - rushing home to try mine out at once as mine are struggling even at their rated 2133. 🙂

Asus Maximus IV Extreme Z
i7 3770K @ 4.4ghz
AMD 7970 HD x3 in TriFire @ 1200/1800.
2x 240GHZ OCZ Vertex 3 SSD & 1x 512Gb Vertex 4
16GB 2133mhz Patriot DDR3
Ennermax Max Revo 1500w PSU
Huge water loop with an internal EK 340mm & external Supernova 1260mm
Windows 7 64 bit.
Aquaero Fan control & monitoring
0 Kudos

rog-classified
Level 9

‎01-19-2013 11:41 PM

just wondering is there a big different between CorsairDominator 2400mhz vs kingston hyperx beast 2400mhz. i bought Kingston beast 2400mhz 32gb. is there any different when overclocking? or am i screwed:(
It ain't over till the fat lady sings :cool:...
0 Kudos

Daveo
Level 11

‎01-20-2013 06:11 PM

Hello,

not quite sure what you were asking in your post but I will answer in this way.

The differences may vary from kit to kit. if your hardware is capable of 2400mhz, these differences may just be a matter of timings and voltages, though with 32gb capacities, its highly probable that youll need to make some changes to the cpu/memory controller, in addition to any ram tweaks. Keeping in mind CR command rate will likely need to be changed to a value of two, for 32gb capacities and higher- can confirm this for x79 chipsets.

Actual differences in performance at 2400mhz between vendors will be small, unless youre comparing dual channel against quad channel.

But I think you are safe, kingston make some fine hyper modules.

Daveo
0 Kudos