cancel
Showing results for 
Search instead for 
Did you mean: 

New System only getting 18K Cinebench R23?

RickSinGA
Level 11
Just built a new system primarily for MSFS 2020 and in stock format I am only seeing Cinebench R23 scores of under 19K and from what I gather I should be pushing 40K stock?

Rog Z790 Strix E-Gaming WiFi Bios 0816
Intel I9-13900KS
G.Skill Trident Z5 RGB DDR5-6400 2x16GB
Asus Tuf RTX 4090 gaming Video
EK Quantum Velocity2 Waterblock w 2 60mm 420 Radiators
Thermaltake 1350w Gold PS

I can OC to 60/59/45 -0.125 Offset and improve my score from 17K to low 19K but from everything I have been able to find I should be seeing at least 40,000 on the Cinebench R23 benchmark.

I assumed it was a bad CPU and B&H sent me a new one, marginally better on the SP scale from 103 to 112; which did improve the OC slightly but that isn't the problem from what I see.

I also had some DDR-5 6000 which saw my scores lessen slightly, so that is not it!

Also have the latest Intel ME drivers and firmware. Armoury Crate updated all drivers etc.

MB?

Any ideas?
1,058 Views
5 REPLIES 5

RickSinGA
Level 11
Come on guy's, need some direction!

Just tried resetting the CMOS, cause why not!

Didn't change a thing from stock.

CB=17,214 ???????????????????

Temps were fine.

CPUID HWMonitor Report
-------------------------------------------------------------------------

Binaries
-------------------------------------------------------------------------

HWMonitor version 1.5.0.0

Monitoring
-------------------------------------------------------------------------

Mainboard Model ROG STRIX Z790-E GAMING WIFI (0x00000750 - 0x33ACB308)

LPCIO
-------------------------------------------------------------------------

LPCIO Vendor Nuvoton
LPCIO Model NCT6798D-R
LPCIO Vendor ID 0x5CA3
LPCIO Chip ID 0xD4
LPCIO Revision ID 0x2B
Config Mode I/O address 0x2E
Config Mode LDN 0xB
Config Mode registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 FF FF 00 FF FF FF FF 0B FF FF FF FF FF FF FF FF
10 CF C3 FF 0C B8 FF FF FF FF FF 00 00 00 00 FF FF
20 D4 2B FF 00 00 10 10 00 10 FF 5B 00 2A 30 00 06
30 01 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
40 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
60 02 90 0B 00 0A 00 FF FF FF FF FF FF FF FF FF FF
70 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Register space LPC, base address = 0x0290

Register space PMIO, base address = 0x0A00

EDITED to show HWMonitor while Cinebench was running to show real temps etc.

Hardware Monitors
-------------------------------------------------------------------------

Hardware monitor Nuvoton NCT6791D
Voltage 0 5.00 Volts [0x7D] (+5V)
Voltage 1 3.36 Volts [0xD2] (+3.3V)
Voltage 2 12.00 Volts [0x7D] (+12V)
Voltage 3 0.58 Volts [0x49] (VIN3)
Voltage 4 1.78 Volts [0x6F] (VIN4)
Voltage 5 1.30 Volts [0x92] (VCORE)
Voltage 6 1.05 Volts [0x83] (VIN6)
Voltage 7 0.80 Volts [0x32] (VIN7)
Temperature 0 27 degC (80 degF) [0x1B] (Mainboard)
Temperature 1 78 degC (172 degF) [0x4E] (CPU)
Temperature 2 27 degC (80 degF) [0x1B] (TMPIN2)
Temperature 3 37 degC (98 degF) [0x25] (TMPIN3)
Temperature 4 20 degC (68 degF) [0x14] (TMPIN4)
Temperature 5 27 degC (80 degF) [0x1B] (TMPIN5)
Temperature 6 17 degC (62 degF) [0x11] (TMPIN6)
Fan 1 1068 RPM [0x42C] (CPU)
Fan 2 1125 RPM [0x465] (Chassis #2)
Fan 3 1824 RPM [0x720] (Chassis #3)
Fan 5 4753 RPM [0x1291] (Chassis #5)
Register space PMIO, base address = 0x0A00

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 91 7D D4 D2 7D 92 8D D4 00 41 3D 49 83 32 6F 7B
10 1B 25 13 1B 11 20 4D 26 71 43 43 43 43 43 43 3F
20 1B 00 F3 D0 D0 D0 F3 F3 00 00 00 00 00 00 FF 1F
30 28 03 25 07 17 01 FF 1F 08 1C 00 00 04 1C 04 6D
40 07 27 00 00 12 91 00 00 FF FF 1F FF F3 D0 D0 D0
50 F3 F3 4E C0 00 00 00 2C 00 00 00 00 00 00 00 00
60 00 00 00 43 00 FF FF 00 FF FF FF FF FF FF FF 00
70 00 43 00 F5 00 1B 25 80 FF FF FF FF FF FF FF FF
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
90 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
A0 00 FF 00 00 FF FF FF FF FF FF FF FF FF FF FF FF
B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Hardware monitor DIMM
Temperature 0 36 degC (97 degF) [0x244] (Core)

Hardware monitor DIMM
Temperature 0 36 degC (96 degF) [0x240] (Core)

Hardware monitor ACPI
Temperature 0 28 degC (82 degF) [0xBC2] (TZ00)

Hardware monitor NVIDIA NVML
Power 01 53.95 W (GPU)
Temperature 1 30 degC (86 degF) [0x1E] (GPU)

Hardware monitor NVIDIA NVAPI
Power 01 53.86 W (GPU)
Power 06 21.85 W (Core Power Supply)
Power 07 26.00 W (Frame Buffer Power Supply)
Power 10 6.01 W (PCIe +12V)
Power 19 47.86 W (16-PIN 12VHPWR)
Temperature 1 31 degC (87 degF) [0x1E] (GPU)
Temperature 3 36 degC (96 degF) [0x24] (Memory)
Temperature 2 38 degC (100 degF) [0x26] (Hot Spot)
Clock Speed 0 2520.00 MHz [0x9D8] (Graphics)
Clock Speed 1 10501.98 MHz [0x2905] (Memory)
Clock Speed 2 n.a. (Processor)

Hardware monitor D3D

Hardware monitor Intel IGCL
Clock Speed 0 1650.00 MHz [0x672] (Graphics)
Clock Speed 1 n.a. (Memory)
Clock Speed 2 n.a. (Processor)

Hardware monitor Intel oneAPI
Voltage 0 0.42 Volts [0x1A1] (GPU)
Clock Speed 0 1650.00 MHz [0x672] (Graphics)
Clock Speed 1 n.a. (Memory)
Clock Speed 2 n.a. (Processor)

Hardware monitor D3D

Hardware monitor Intel I/O
Temperature 1 37 degC (98 degF) [0x25] (GPU)
Clock Speed 0 1650.00 MHz [0x672] (Graphics)
Clock Speed 1 n.a. (Memory)
Clock Speed 2 n.a. (Processor)


Processors
-------------------------------------------------------------------------

CPU Groups 1
CPU Group 0 24 threads, mask=0xFFFFFF

Number of sockets 1
Number of threads 24

APICs
-------------------------------------------------------------------------

Socket 0
-- Core 0 (ID 0)
-- Thread 0 0
-- Thread 1 1
-- Core 1 (ID 4)
-- Thread 2 8
-- Thread 3 9
-- Core 2 (ID 😎
-- Thread 4 16
-- Thread 5 17
-- Core 3 (ID 12)
-- Thread 6 24
-- Thread 7 25
-- Core 4 (ID 16)
-- Thread 8 32
-- Thread 9 33
-- Core 5 (ID 20)
-- Thread 10 40
-- Thread 11 41
-- Core 6 (ID 24)
-- Thread 12 48
-- Thread 13 49
-- Core 7 (ID 28)
-- Thread 14 56
-- Thread 15 57
-- Core 8 (ID 64)
-- Thread 16 64
-- Core 9 (ID 66)
-- Thread 17 66
-- Core 10 (ID 68)
-- Thread 18 68
-- Core 11 (ID 70)
-- Thread 19 70
-- Core 12 (ID 72)
-- Thread 20 72
-- Core 13 (ID 74)
-- Thread 21 74
-- Core 14 (ID 76)
-- Thread 22 76
-- Core 15 (ID 78)
-- Thread 23 78

Timers
-------------------------------------------------------------------------

ACPI timer 3.580 MHz
Perf timer 10.000 MHz
Sys timer 1.000 KHz


Processors Information
-------------------------------------------------------------------------

Socket 1 ID = 0
Number of cores 16 (max 24)
Number of threads 24 (max 32)
Hybrid yes, 2 coresets
Core Set 0 P-Cores, 8 cores, 16 threads
Core Set 1 E-Cores, 8 cores, 8 threads
Manufacturer GenuineIntel
Name Intel Core i9 13900K
Codename Raptor Lake
Specification 13th Gen Intel(R) Core(TM) i9-13900KS
Package (platform ID) Socket 1700 LGA (0x1)
CPUID 6.7.1
Extended CPUID 6.B7
Core Stepping B0
Technology 10 nm
TDP Limit 150.0 Watts
Tjmax 100.0 °C
Core Speed 5600.0 MHz
Multiplier x Bus Speed 56.0 x 100.0 MHz
Base frequency (cores) 100.0 MHz
Base frequency (mem.) 100.0 MHz
Stock frequency 3200 MHz
Max frequency 6000 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX, AVX2, FMA3, SHA
Microcode Revision 0x10E
L1 Data cache 8 x 48 KB (12-way, 64-byte line) + 8 x 32 KB (8-way, 64-byte line)
L1 Instruction cache 8 x 32 KB (8-way, 64-byte line) + 8 x 64 KB (8-way, 64-byte line)
L2 cache 8 x 2 MB (16-way, 64-byte line) + 2 x 4 MB (16-way, 64-byte line)
L3 cache 36 MB (12-way, 64-byte line)
Preferred cores 2 (#2, #3)
Max CPUID level 00000020h
Max CPUID ext. level 80000008h
FID/VID Control yes


Turbo Mode supported, enabled
Max non-turbo ratio 32x
Max turbo ratio 60x
Max efficiency ratio 8x
Min operating ratio 8x
Speedshift Autonomous
FLL_OC_MODE 0
FLL_OC_MODE_REG 0x00000000
O/C bins unlimited
Ratio 1 P-Core 60x
Ratio 2 P-Cores 60x
Ratio 3 P-Cores 56x
Ratio 4 P-Cores 56x
Ratio 5 P-Cores 56x
Ratio 6 P-Cores 56x
Ratio 7 P-Cores 56x
Ratio 8 P-Cores 56x
Ratio 1 E-Core 43x
IA Voltage Mode PCU adaptive
IA Voltage Offset 0 mV
GT Voltage Mode PCU adaptive
GT Voltage Offset 0 mV
LLC/Ring Voltage Mode PCU adaptive
LLC/Ring Voltage Offset 0 mV
Agent Voltage Mode PCU adaptive
Agent Voltage Offset 0 mV
TDP Level 150.0 W @ 32x

Temperature 0 78 degC (172 degF) (Package)
Temperature 1 78 degC (172 degF) (P-Cores (Max))
Temperature 2 59 degC (138 degF) (E-Cores (Max))
Temperature 3 66 degC (150 degF) (P-Core #0)
Temperature 4 65 degC (149 degF) (P-Core #1)
Temperature 5 67 degC (152 degF) (P-Core #2)
Temperature 6 78 degC (172 degF) (P-Core #3)
Temperature 7 66 degC (150 degF) (P-Core #4)
Temperature 8 70 degC (158 degF) (P-Core #5)
Temperature 9 65 degC (149 degF) (P-Core #6)
Temperature 10 70 degC (158 degF) (P-Core #7)
Temperature 11 45 degC (113 degF) (E-Core #8)
Temperature 12 45 degC (113 degF) (E-Core #9)
Temperature 13 45 degC (113 degF) (E-Core #10)
Temperature 14 45 degC (113 degF) (E-Core #11)
Temperature 15 59 degC (138 degF) (E-Core #12)
Temperature 16 57 degC (134 degF) (E-Core #13)
Temperature 17 57 degC (134 degF) (E-Core #14)
Temperature 18 57 degC (134 degF) (E-Core #15)
Voltage 0 +0.00 Volts (IA Offset)
Voltage 1 +0.00 Volts (GT Offset)
Voltage 2 +0.00 Volts (LLC/Ring Offset)
Voltage 3 +0.00 Volts (System Agent Offset)
Voltage 4 1.32 Volts (VID (Max))
Voltage 5 1.29 Volts (VID #0)
Voltage 6 1.30 Volts (VID #1)
Voltage 7 1.30 Volts (VID #2)
Voltage 8 1.30 Volts (VID #3)
Voltage 9 1.32 Volts (VID #4)
Voltage 10 1.29 Volts (VID #5)
Voltage 11 1.29 Volts (VID #6)
Voltage 12 1.30 Volts (VID #7)
Voltage 13 1.29 Volts (VID #8)
Voltage 14 1.29 Volts (VID #9)
Voltage 15 1.29 Volts (VID #10)
Voltage 16 1.30 Volts (VID #11)
Voltage 17 1.30 Volts (VID #12)
Voltage 18 1.30 Volts (VID #13)
Voltage 19 1.30 Volts (VID #14)
Voltage 20 1.29 Volts (VID #15)
Power 00 179.11 W (Package)
Power 01 172.11 W (IA Cores)
Power 02 0.01 W (GT)
Power 03 n.a. (DRAM)
Clock Speed 0 5600.00 MHz (P-Core #0)
Clock Speed 1 5600.00 MHz (P-Core #1)
Clock Speed 2 5600.00 MHz (P-Core #2)
Clock Speed 3 5600.00 MHz (P-Core #3)
Clock Speed 4 5600.00 MHz (P-Core #4)
Clock Speed 5 5600.00 MHz (P-Core #5)
Clock Speed 6 5600.00 MHz (P-Core #6)
Clock Speed 7 5600.00 MHz (P-Core #7)
Clock Speed 8 4300.00 MHz (E-Core #8)
Clock Speed 9 4300.00 MHz (E-Core #9)
Clock Speed 10 4300.00 MHz (E-Core #10)
Clock Speed 11 4300.00 MHz (E-Core #11)
Clock Speed 12 4300.00 MHz (E-Core #12)
Clock Speed 13 4300.00 MHz (E-Core #13)
Clock Speed 14 4300.00 MHz (E-Core #14)
Clock Speed 15 4300.00 MHz (E-Core #15)
Core 0 max ratio 56.00 (effective 56.00)
Core 1 max ratio 56.00 (effective 56.00)
Core 2 max ratio 60.00 (effective 60.00)
Core 3 max ratio 60.00 (effective 60.00)
Core 4 max ratio 56.00 (effective 56.00)
Core 5 max ratio 56.00 (effective 56.00)
Core 6 max ratio 56.00 (effective 56.00)
Core 7 max ratio 56.00 (effective 56.00)
Core 8 max ratio 43.00 (effective 43.00)
Core 9 max ratio 43.00 (effective 43.00)
Core 10 max ratio 43.00 (effective 43.00)
Core 11 max ratio 43.00 (effective 43.00)
Core 12 max ratio 43.00 (effective 43.00)
Core 13 max ratio 43.00 (effective 43.00)
Core 14 max ratio 43.00 (effective 43.00)
Core 15 max ratio 43.00 (effective 43.00)


Thread dumps
-------------------------------------------------------------------------

CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Cache descriptor Level 1, D, 48 KB, 2 thread(s)
Cache descriptor Level 1, I, 32 KB, 2 thread(s)
Cache descriptor Level 2, U, 2 MB, 8 thread(s)
Cache descriptor Level 3, U, 36 MB, 128 thread(s)

RickSinGA
Level 11
No ideas?

Motherboard? I have about 10 days left with B&H for a return/replacement.

BIOS?

Power Supply? Not sure what Microcenter's replacement policy is around 30 days.

Any input would be appreciated.

RogScott
Level 12
According to the hwmon report, package is only pulling 180w. I think the people getting those 40k scores are hitting 340w.

I highly doubt there's anything wrong with the board or cpu. Best guess would be a bios setting that is limiting power, but I'm not familiar with that motherboard. Hopefully someone else will come along with more familiarity. You might try posting in the "Intel 600 & 700 Series Motherboard" sub-forum here -- I think it gets more traffic than this one so someone with your configuration is more likely to see the post.

Is AiTweaker / Asus Multicore enhancement set to Auto or Unlimited?

ALSO... Make sure your Windows "power plan" is set to "Performance", not balanced.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Z690-E, i9-12900k, 2x16 DDR5, 980pro nvme x3, Ryujin-II 360, Strix Animate-II, Evga 3090 ftw3

RickSinGA
Level 11
Thanks for the reply Scott. I thought I had it figured out last night after downloading and reinstalling R23 several times. If I ran it from a shortcut I got the 18K results. If I ran it straight from the installed directory it got way faster. Only to the 31K area, which was better and I thought I would tweak a few things and I would see the 40K area.

No! 32,613 at 60/59/45 with a -0.075 offset using Intel-XTU. I did see Power as high as 315.01W and 293.25W with the best score? Temps were 97 with the best score also (only running for 1 minute intervals).

Power plan is set to Performance and the BIOS was set to Optimized Default to start with; then XMP Tweaked, that is it; I changed nothing else from defaults.

I will migrate over the Z790 per your suggestion.

If you have the power, can you switch this thread over to the Z790 forum?

Thanks
Rick S.

RickSinGA wrote:
If you have the power, can you switch this thread over to the Z790 forum?
Rick S.


I do not, but I saw your post in the 600/700 forum. Hopefully some folks there with z790 boards will have some more specific advice.

RickSinGA wrote:
I thought I had it figured out last night after downloading and reinstalling R23 several times. If I ran it from a shortcut I got the 18K results. If I ran it straight from the installed directory it got way faster.


That is strange, and I am not sure what could cause that. Perhaps loading some different dlls or something. Have you tried the Microsoft Store version of Cinebench R23? Would be interesting to see if it gives any different result.

RickSinGA wrote:
Power plan is set to Performance and the BIOS was set to Optimized Default to start with; then XMP Tweaked, that is it; I changed nothing else from defaults.


The "Asus Multicore Enhancements" option in bios may already be enabled by default (I think it is on my z690). If not, try enabling it, as it (theoretically) raises some power limits in addition to letting all pcores run full speed simultaneously (which it looks like yours already are).
-----------------------------------------------------------------------------------------------------------------------------------------------------
Z690-E, i9-12900k, 2x16 DDR5, 980pro nvme x3, Ryujin-II 360, Strix Animate-II, Evga 3090 ftw3