Need help with OC crosshair v formula z and fx8150

[Korvan]

CORSAIR Dominator Platinum 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400
AMD FX-8150 Zambezi 3.6GHz (3.9GHz/4.2GHz Turbo) Socket AM3+ 125W Eight-Core Desktop Processor with Liquid Cooling Kit
KINGWIN LZP-1000 1000W ATX 12V v2.2, EPS 12V v2.91, and SSI EPS 12V v2.92 SLI Ready CrossFire Ready 80 PLUS PLATINUM
HIS IceQ Boost Clock H795QC3G2M Radeon HD 7950 3GB 384-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card
ASUS Crosshair V Formula-Z AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Gaming Motherboard with 3-Way SLI/CrossFireX Support and UEFI BIOS
COOLER MASTER HAF 932 Advanced RC-932-KKN5-GP Black Steel ATX Full

Since day 1 of my build I seem to have issues with OC. I posted in the forums awhile back and didn't get to far.
I have since then not oc'd my system at all. I can test all hardware and tests are good. I can wipe my HDD re install everything and still get random freezing and have to force reboot or like as of late i get glitches in os. I have like in background 12 images setup to rotate and they sometimes ghost each other overlapping like both are present at same time,
Also if I run any type of registry cleaning software whole system will lock up causing force reboot
I have made sure all drivers and windows updates are up to date and begin to wonder if hardware was never good from the beginning. My ram I am not sure if fully compatible with the MOBO BUT i seen some say it is.
I really need any help I can get I had my previous build last me 7 years with not half the specs of this system and it still runs to date without any issues.
I am currently running windows 8 64 bit as well. I have Govt issued symantec endpoint protection running and no other crap on it but games and some basic software applications.
Any advice on hardware or how I might need to setup Bios. Please dont refer me to the crosshair v formula z and 8150 OC guide. I simply dont get from it enough to oc my rig. I feel there is something missing or perhaps I am too much of a noob and got lucky on my first build.
Ty again for any quick responses

[abvolt]

Have you checked to see if there is a new bios update that will fix hardware compatibility issues.

[HiVizMan]

Sounds like there is something wrong some place for sure.

At stock you are having these problems. I would honestly try a fresh OS install but without the End Point. Not a fan at all.

That being said if your board is at defaults in the bios then it should just work. What changes in the bios have you made?

[Korvan]

I have done fresh install about 4 months ago. No new bios is released im on latest one from asus site. I have made no changes atm. Bios is at complete default

[HiVizMan]

That is not good.

Confirm that both the EPS 12v PSU connectors are fitted please, and if possible do a re-flash of the bios using a fat formatted USB stick via the bios.

[Korvan]

I will do these things tonight and report back ok. Currently at work lol ty for your responses any other advice is greatly appreciated

[Korvan]

I am very confused guys
My mobo is what i listed above crosshair v formula z
auto detect on asus site for support says crosshair v formula
I have original box and mobo says z at end so went to this site
http://support.asus.com/download.aspx?SLanguage=en&m=Crosshair+V+Formula-Z&os=30
updated latest bios and also chipset though the chipset install takes like 15 seconds total seems to be too quick of install.
I dont know what to do now to actually see if i have it right except to wait for something to happen
Also i did check to see if if my connections were seated adn are

[HiVizMan]

Please download CPUz

Then open the motherboard tab and post up an image here.

[Korvan]

Here ya go

[HiVizMan]

Cheers mate.

Certainly you have the Z board.

Now go to the ASUS support page for the CHV-z board and download the latest bios, or the bios version you want to have on your system.

Extract the bios to the root directory of a fat formatted USB stick, place the stick in a USB2 port and get into bios, use the EZflash2 utility in the tools menu of the bios and flash your board.